Teddy
New Member
nah it will be because you use "LOL" to muchomg am i glad i don't have one of these, (although they are a great looking motor) i wouldnt have a clue where to start but hey that because im a woman i suppose lol
Vampy^^
New Member
Take5
New Member
Teddy
New Member
hiya gang, erm... I have a slight problem and I need some advice please guys. A mechanic that is one of my neighbours gave the ole p38 a check over, he found that I had some axle fluid leaking out of one of the seals, erm he called it a inner axle seal, he said it wasnt a problem and he can sort that, he also pumped more fluid into the axle so we didnt lose too much. he checked the discs and pads and do need replacing, Ive ordered the parts already, but what i am worried about are the tiny cracks in the air suspension bags, one at the top and one at the bottom, question is, how thick are these bags and am I about to have a burst bag? and how much are these to replace? I am a little scared of this bag exploding on the motorway, they are not leaking atm which is a good thing.
I am a little scared of this bag exploding on the motorway, they are not leaking atm which is a good thing.
hiya gang, erm... I have a slight problem and I need some advice please guys. A mechanic that is one of my neighbours gave the ole p38 a check over, he found that I had some axle fluid leaking out of one of the seals, erm he called it a inner axle seal, he said it wasnt a problem and he can sort that, he also pumped more fluid into the axle so we didnt lose too much. he checked the discs and pads and do need replacing, Ive ordered the parts already, but what i am worried about are the tiny cracks in the air suspension bags, one at the top and one at the bottom, question is, how thick are these bags and am I about to have a burst bag? and how much are these to replace?
would it not have bin wise to get him to look it ovva before you bought it.
Sirus
Your all Banned except me
Teddy
New Member
your so right bud, my only prob was that my neighbour works away and I dont see him much. but yep you are right, I am having trouble getting a part though if anyone can help, its a inner seal axle to cv joint for front drivers side.
Regards Ted and thanks in advance
That'll be that hindsight thingy then.
no, its called forward planning. you get someone to look at it to ensure you int buying a pig in a poke. you dint get someone to look at it to see if you have bought a pig in a poke
take the kanckered one down to yer local bearing and seal place and get them to match it up fer you. should cost a **** load less than geting one in a placcy bag that has landrover written on it
Vampy^^
New Member
larfed til i threw up all over ming's gaylanderere slob could you enlighten me by telling what that means? ta!!
Teddy
New Member
yup ive had a mechanic look at it. he says its nothing serious but it does need doing. I am having the discs and pads done also.
Teddy
New Member
I dont think we have a local bearing and seal place here but ive got the number of green oval. I will call them. thanks bud
