Datatek
Well-Known Member
Yep, I always raise the front to refill the system.
RangeRoller dt
Well-Sprung Member
Yip, was you showed me that one
aj1954
Well-Known Member
I didn't like tension clips until, I got the tool to release them, the cable type for difficult to access ones.
The problem i have is that they bend slightly at the far end of the screw unless you have exactly the right size.. then you have a small section with less/no compression
Monkeynuts321
Member
I would like to thank everyone for there help with my overheating problems i bleed the cooling system ran the engine for nearly an hour no problems then the new clutch i put in on the viscous fan started to kick in which it didn't do before I could have dried my hair with the air that came off it but I haven't got any
thank you very much everyone.
Datatek
Well-Known Member
Well done and thanks for reporting back.I would like to thank everyone for there help with my overheating problems i bleed the cooling system ran the engine for nearly an hour no problems then the new clutch i put in on the viscous fan started to kick in which it didn't do before I could have dried my hair with the air that came off it but I haven't got any
