Karlos the jackal
Well-Known Member
What is rave
tomcat59alan
Well-Known Member
Go to the Technical Archive and you will find a download for the workshop manual known as Rave.
Karlos the jackal
Well-Known Member
We got the all the tools to press the ball joints in and out of the yoke thought you needed a hub alignment tool
tomcat59alan
Well-Known Member
As long as you don't move the adjustment collar you should be fine.
Karlos the jackal
Well-Known Member
The adjustment collar is on the yoke not the ball joint
tomcat59alan
Well-Known Member
Karlos the jackal
Well-Known Member
Thanks for that it the info I was waiting for as long as dont touch it I wont need to align the yoke back up
tomcat59alan
Well-Known Member
Correct.
The top ball joint floats up and down, the bottom sits in the adjuster so dont touch the adjuster and use lemforda (or ever its spelt) the are oem.
Karlos the jackal
Well-Known Member
@EntropyUK did his recently. There's a video on YouTube where a guy makes his own alignment tool out of some plastic pipe or somesuch. I think entropy uk might have done something similar.
Last edited:
RangeRoller dt
Well-Sprung Member
Can’t look up threads while search is down. @EntropyUK
Karlos the jackal
Well-Known Member
I saw that he used a tapered bearing sure he said it was 68mm outside diameter with 35 Inside
Karlos the jackal
Well-Known Member
Can you send me the dimensions please
Not off hand, tool and measuring stuff are in garage and can't get there at the moment. Will see if i can find the working drawing i did. Or find axle dimensions i have somewhere.
Karlos the jackal
Well-Known Member
Thank you very much
Thats right I put the vid on here. He even provided links to the parts he bought so you don't have to worry about getting the right one.
Karlos the jackal
Well-Known Member
Could you find the links for me please
Karlos the jackal
Well-Known Member
It's ok I think I found it
