Yes they work. Make sure you get tdi version to leave intercooler open.

I have a farmers version. :)
Plastic sack held by the bonnet at the top & bungy cord for the bottom.
Covers rad but not intercooler.
Mines been on since November & won't be off till it warm. I have No viscous fan & don't turn the electric one on either.

I have a bigger bag that goes across the front for deep water wading

Will send a photo in the morning.
 
Here's my motor muff.
Quick thought if you want to look neat a piece of Ali/Perspex behind the black grill?
IMG_8183.JPG
 
Radiator muff fitted and now the temp gauge actually reaches half way, quicker anorl. That means the heat is getting blown in quicker too yay.
 
Wipers now working again. Removed dash end and cleaned up the earth to bulkhead. Like @bluedog333 I now have a flapping passenger side wiper as the splines on the adaptor are worn down, I'll order them today, but for now Ive knocked them home with some masking tape packing. Decided to ditch the A bar and will now add the spots to the bumper instead, this should allow more air to reach the grill. So while the bumper is off I've given it a coat of bed liner as the original paint is thin.
 
Last edited:
doriz said:
Wipers now working again. Removed dash end and cleaned up the earth to bulkhead. Like @bluedog333 I now have a flapping passenger side wiper as the splines on the adaptor are worn down, I'll order them today, but for now Ive knocked them home with some masking tape packing. Decided to ditch the A bar and will now add the spots to the bumper instead, this should allow more air to reach the grill. So while the bumper is off I've given it a coat of bed liner as the original paint is thin.
Click to expand...
I should have done the masking tape trick, I took the wiper arm off and drove to Dingocroft, typically it started to rain on the way, so I ended up opening the window and reaching around with the wiper in my hand to clear the screen. Hope somebody saw me, would have given them a little chuckle.
 
Just done a couple of things on me Defenderer - Have also added a picture of the state of the off side passenger door, the nearside has had a make do and mend repair.
 

Attachments

  • IMG_1406.JPG
    IMG_1406.JPG
    275.4 KB · Views: 372
  • IMG_1408.JPG
    IMG_1408.JPG
    465 KB · Views: 356
  • IMG_1403.JPG
    IMG_1403.JPG
    515.5 KB · Views: 383
  • IMG_1405.JPG
    IMG_1405.JPG
    381.8 KB · Views: 385
  • IMG_1407 2.JPG
    IMG_1407 2.JPG
    317.3 KB · Views: 342
So I filled up my swivels about 2 months ago. The offside front wheel now has the grease allover the wheel, what's failed the hub seal or the paper gasket?
 
doriz said:
Outside
Click to expand...

Then I would say it is the drivemember gasket, it is where I would start, easy to change and nothing lost if it does not fix it.But first thing I would do is check the bolts and make sure they are tight.

Cheers
 
Here is the issue. Looks like its coming from the rubber cap @neilly .
 

Attachments

  • IMG_1558.JPG
    IMG_1558.JPG
    419.8 KB · Views: 296
Last edited:
You must log in or register to reply here.

Similar threads

S
Galv 110 CSW B post
Replies
0
Views
342
shaynecm
S
Agripper
Defender td5 2001 speedo fault
Replies
4
Views
515
Agripper
Agripper
T
'89 Defender CSW middle row seats
Replies
1
Views
336
v8250
v8250
ryan_1993
Engine loom has melted on my 300 tdi
Replies
18
Views
893
Dippypud
Dippypud
T
Adapting rear Puma seats for second row TD5
Replies
5
Views
482
FlyingPete
FlyingPete