codfather79

codfather79

Well-Known Member
Afternoon one and all.

Im looking for some new door frames for Noel, my s3 LWB stn wagon.

Ive found galv door tops. Excellent.
Ive found bottom door repair sections. Ok.
Ive found complete replacement bottom doors inc skins. Not needed.

What im really after is a complete lower galvanized frame without the skin.
Does anybody sell just the frame?

The skins I have are in an ok condition and original, so I would like to keep them, but the frames are rotten.
Am I just being daft in wanting to keep the original skins?
Should I just buy the complete door (x4) ?

Hellllllllllllllllllp !

Cheers, Shirl.
 
Are the panels actually in good enough condition to re-use? the bottom seem on mine has corroded through in a couple of places along the bend so I am looking for complete doors with galv frame. @Wildefalcon suggestion is a good one as then if your old ones do split coming apart you already have replacements fitted. Just make sure you remove the old ones first, before the new ones!
 
You need to anneal the Ali door skin along its folded edge, then you could unfold the door skins off the frame. You'd need to apply heat get the Ali red hot then quench. I need to do same
 
tony109 said:
You need to anneal the Ali door skin along its folded edge, then you could unfold the door skins off the frame. You'd need to apply heat get the Ali red hot then quench. I need to do same
Click to expand...
That's not how to anneal aluminium. Heat until soap browns or a rubbed piece of wood leaves a mark. Do not quench - that's tempering and will stiffen the metal, just what you don't want.
 
tony109 said:
You need to anneal the Ali door skin along its folded edge, then you could unfold the door skins off the frame. You'd need to apply heat get the Ali red hot then quench. I need to do same
Click to expand...
Aluminium doesn't go red hot. As you heat it, it goes Grey, Grey, Melted.
 
codfather79 said:
Afternoon one and all.

Im looking for some new door frames for Noel, my s3 LWB stn wagon.

Ive found galv door tops. Excellent.
Ive found bottom door repair sections. Ok.
Ive found complete replacement bottom doors inc skins. Not needed.

What im really after is a complete lower galvanized frame without the skin.
Does anybody sell just the frame?

The skins I have are in an ok condition and original, so I would like to keep them, but the frames are rotten.
Am I just being daft in wanting to keep the original skins?
Should I just buy the complete door (x4) ?

Hellllllllllllllllllp !

Cheers, Shirl.
Click to expand...
If you do reskin the doors, make sure to paint the metal frames thoroughly before replacing the skins, and maybe put some puttty or similar in between the skin and the frame. That prevents the dissimilar metal corrosion that is a problem on Land Rovers.

But I would just buy the doors.
 
Turboman said:
If you do reskin the doors, make sure to paint the metal frames thoroughly before replacing the skins, and maybe put some puttty or similar in between the skin and the frame. That prevents the dissimilar metal corrosion that is a problem on Land Rovers.

But I would just buy the doors.
Click to expand...
The door frames rust for a pass time, so if you galvanise the steel door and window frames before refitting the Ali skins, this will stops any electrolytic corrosion.
 
You must log in or register to reply here.

Similar threads

R
Galvanised doors
Replies
4
Views
964
R1nut
R
dag019
Are all door latches equal?
Replies
2
Views
339
dag019
dag019
A
Series 3 Land Rover S3 Purchase Questions
2
Replies
22
Views
3K
ANK84
A
ChrisBduck
3.6L Land rover 90
Replies
2
Views
831
ChrisBduck
ChrisBduck
O
Body Alignment Help Needed
Replies
17
Views
3K
catman275
catman275