Turboman · Mar 4, 2015

Grimmer said:
When I did my bushes (all original), I needed nothing more than a chimnea, a hacksaw a punch and a hammer. Then replaced the lot with poly bushes...... simples.
Take radius arm (or whatever) off vehicle, stick bush end in lit chimnea, sit down with a fag and brew (fag is optional), when old bush has burnt out, remove and allow to cool. Remove hacksaw blade and pass through middle of outer bush before re-attaching to the hacksaw frame. CAREFULLY saw through the outer bush before knocking it out with the punch, job done

I used to do that years ago on series, and it does work well

With a series the big bushes in the chassis have to be burnt out with a blowtorch, then reverse the hacksaw blade in frame to cut the shell.

I must have gone off the smell of burning rubber nowadays!

Paul D · Mar 4, 2015

I was gonna burn mine, hence the fire, but then did this ..

To re-fit new original bushes I used Aarons press, I think, or was it on the A-frame bushes?, which took about 8 tonne pressure before they seated.

https://www.youtube.com/watch?v=tP-8K5G8bTk

Grimmer · Mar 4, 2015

Turboman said:
I used to do that years ago on series, and it does work well With a series the big bushes in the chassis have to be burnt out with a blowtorch, then reverse the hacksaw blade in frame to cut the shell.

I must have gone off the smell of burning rubber nowadays!

Using a chimnea is a lot tidier and less hassle than a blow torch/gas axe, and as long as you stay up wind you don't smell a thing

:clap2::lol:

Turboman · Mar 4, 2015

Grimmer said:
Using a chimnea is a lot tidier and less hassle than a blow torch/gas axe, and as long as you stay up wind you don't smell a thing:clap2::lol:

Yes, I should think it would work well, we don't have one, bit too windy here for sitting outside!

But my neighbours have got one, if I need to do any I could take them down there! Have a few drinks and burn em out slow!

Good to see Paul displaying his usual ingenuity, loving the little gas bottle brazier thingy!

Grimmer · Mar 4, 2015

Turboman said:
But my neighbours have got one, if I need to do any I could take them down there! Have a few drinks and burn em out slow!

Now that sounds like a plan, good thinking that man

Paul D · Mar 4, 2015

Turboman said:
Good to see Paul displaying his usual ingenuity, loving the little gas bottle brazier thingy!

Heheh, I aim to please ..

Turboman

Mab An Gov

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Grimmer

THE Winner