I'm currently converting my RRC from 3.9V8 to a 200Tdi. I am using an R380 gearbox, already fitted and all ok. Got the engine in and just positioning the engine mounts before welding them, with the engine level the engine mount on the off side is approx 1/4 inch above the chassis but on the near side the mount is about 1 inch down the chassis so part of the mount is below the chassis.

Does anyone have a 200tdi classic that could tell me if this is correct? The 200Tdi engine is out of an original classic with this engine and has the correct tdi mounts.

Cheers

should be the same height