A

Aljosa

Member
Hello to all readers,

Here is my attemp to rebuild Land Rover Discovery 300TDI ES (1996) I bought last year from third owner. Car was in quite bad shape - It' was not a surprise. I must say that It's almost impossible to find rustless Discovery here in Slovenia as we have a lot of snow in the winter and also a lot of salt on the roads. However after 1 year of renovation car is in much better condition now ;) I hope It will be back on the road next spring.

...and sorry for my english...:oops:

U5_BT3TDiWfcg0GasIJsKBO91Bo-8EijWP3-VfvsIYc.jpg


uQCTyEGj_baUcAKoDTbHuYFstWk1e7Z3WgSo8u7_EGM.jpg
 
day 1 - beginning

WP_20150912_14_55_18_Pro.jpg


surprise surprise....rust all over the place ;)

WP_20150912_15_25_15_Pro.jpg


WP_20150912_16_49_10_Pro.jpg


WP_20150912_17_54_39_Pro.jpg
 

Attachments

  • WP_20150912_17_05_05_Pro.jpg
    WP_20150912_17_05_05_Pro.jpg
    69.4 KB · Views: 184
chassis painted with Raptor U-Pol

WP_20160402_17_40_35_Pro.jpg


motor was completely rebuilded

WP_20160227_10_45_48_Pro.jpg


WP_20160514_11_06_06_Pro.jpg


OME 2" lift with HD springs

WP_20160416_15_35_00_Pro.jpg


Everything back together:

WP_20160514_19_44_23_Pro.jpg
 
Im always really impressed with disco re-builds.

Its nice to see people putting in the effort with cheaper motors.
 
Živjo!
Great thread, your English is fine!
Love your scenery! Very inspiring!
Like the way you removed the body, ingenious!
Interesting that your chassis was in such good condition, maybe they did have good and bad batches of steel!
Good to see more.
Mark
 
Saltlick said:
I like your work - what have you used to repair the swivel with please?
Click to expand...

putty for metal surface...and a lot of sanding (2-3 hours to get nice smooth finish). First you need to clean rust and grease from the surface. At the end It was painted with 2K paint with spray gun.
 
Aljosa said:
putty for metal surface...and a lot of sanding (2-3 hours to get nice smooth finish). First you need to clean rust and grease from the surface. At the end It was painted with 2K paint with spray gun.
Click to expand...
Really nice job you are doing there, it will be hard to get it back on the road and get it dirty again with it looking so good, of all the Disco colours that is my favourite, once again great work. It will give you lots of good service.
 
Fantastic work! Only wish I would be able to do a rebuild like this. Your English is much better than my Slovenian :D
 
Gazbo said:
Really nice job you are doing there, it will be hard to get it back on the road and get it dirty again with it looking so good, of all the Disco colours that is my favourite, once again great work. It will give you lots of good service.
Click to expand...

Thank you...currently It's my hobby to renovate it...but at the end It will be my daily driver.
 
Very nice. We have 'lots' of Discoverys remaining over here, I think they must have built more than any other Land Rover. Sadly, ours are all as bad/ worse for rust as yours was!!
Looking forward to seeing the finished product. Should last for years if you get some rust-proofing wax in there.
 
You must log in or register to reply here.

Similar threads

K
What money should I be asking?
2
Replies
27
Views
3K
Karls
K
Rustyrus
Does discovery radiator/cooling pack fit a defender
Replies
0
Views
583
Rustyrus
Rustyrus
R
Discovery 1 Sold. 1998 300Tdi ES Nottingham
Replies
4
Views
2K
kevstar
kevstar
L
SOLD - Land Rover Ninety (Defender 90) 300TDi Auto soft-top
Replies
9
Views
4K
mondifa
M
T
Electric seats, 300tdi- have searched
2
Replies
24
Views
2K
toadfish
T