Hi, Right i seem to be having a few problems, i will start with the symptons.
On lpg it misfires at around 1500 revs and it loses all power on hills, its a zavoli multipoint just been serviced.
On petrol it has an intermittent running from cold, just misfires lots and no power, now going to sound strange but from we can work out it only starts doing this if its had a full tank of petrol in it and is starting to get to half empty, and if you go and open the filler cap this problem disappears.
Also my mpg is around 6-8 mpg
Right fault codes:
P0447 - Purge canister vent DM-TL Module ( level with 0.5mm (cant remember the rest)
P0453 - fuel tank pressure sensor maximum value exceeded
P0172 Fuelling Adaption ti Multiplicative Minimum value not reached
P0300 Misfire multiple Cylinders
P0301 Misfire cylinder 1 Emission something
P0301 - Misfire cylinder 1 Cat damage something
P0302 Misfire cylinder 2 Emission something
P0302 Misfire cylinder 2 Cat damage something
and thats the same for all 8 cylinders
These are from the petrol ecu, when i had the gas serviced the bloke said that he couldn't get the 02 sensors or evap system to reset their values??
Now its a row spec low compression v8 that a previous owner put in uk spec ecu with lamba sensors and cats which it didn't previously have.
Can anybody please help???
On lpg it misfires at around 1500 revs and it loses all power on hills, its a zavoli multipoint just been serviced.
On petrol it has an intermittent running from cold, just misfires lots and no power, now going to sound strange but from we can work out it only starts doing this if its had a full tank of petrol in it and is starting to get to half empty, and if you go and open the filler cap this problem disappears.
Also my mpg is around 6-8 mpg
Right fault codes:
P0447 - Purge canister vent DM-TL Module ( level with 0.5mm (cant remember the rest)
P0453 - fuel tank pressure sensor maximum value exceeded
P0172 Fuelling Adaption ti Multiplicative Minimum value not reached
P0300 Misfire multiple Cylinders
P0301 Misfire cylinder 1 Emission something
P0301 - Misfire cylinder 1 Cat damage something
P0302 Misfire cylinder 2 Emission something
P0302 Misfire cylinder 2 Cat damage something
and thats the same for all 8 cylinders
These are from the petrol ecu, when i had the gas serviced the bloke said that he couldn't get the 02 sensors or evap system to reset their values??
Now its a row spec low compression v8 that a previous owner put in uk spec ecu with lamba sensors and cats which it didn't previously have.
Can anybody please help???