200tdi ayre Well-Known Member Feb 19, 2015 #1 trying to reserch the offset of commercial D2 steel wheels, does anybody know ?
owl Well-Known Member Feb 19, 2015 #2 It's not in the manual is it, I have them on my build I could measure one if you are stuck.
200tdi ayre Well-Known Member Feb 19, 2015 #3 owl said: It's not in the manual is it, I have them on my build I could measure one if you are stuck. Click to expand... ill have a look in a minute, but ill get back to you if not. trying to work out what to do for my challenge wheels but need something with more offset than standard D2
owl said: It's not in the manual is it, I have them on my build I could measure one if you are stuck. Click to expand... ill have a look in a minute, but ill get back to you if not. trying to work out what to do for my challenge wheels but need something with more offset than standard D2
200tdi ayre Well-Known Member Feb 19, 2015 #4 It just says 7j 16 in the handbook unfortunately Which means they will be 9 inch with beadlocks which is about right. If you could measure them that would be great
It just says 7j 16 in the handbook unfortunately Which means they will be 9 inch with beadlocks which is about right. If you could measure them that would be great
owl Well-Known Member Feb 20, 2015 #5 200tdi ayre said: It just says 7j 16 in the handbook unfortunately Which means they will be 9 inch with beadlocks which is about right. If you could measure them that would be great Click to expand... I will have a look Sat PM
200tdi ayre said: It just says 7j 16 in the handbook unfortunately Which means they will be 9 inch with beadlocks which is about right. If you could measure them that would be great Click to expand... I will have a look Sat PM
200tdi ayre Well-Known Member Feb 21, 2015 #6 owl said: I will have a look Sat PM Click to expand... Cheers
owl Well-Known Member Feb 21, 2015 #7 Just measured one. Measuring from the inside of the naive plate too the rim not including the small bit of the flange that is turned over, inside is 6 inch and outside just over an inch. Hope this helps.
Just measured one. Measuring from the inside of the naive plate too the rim not including the small bit of the flange that is turned over, inside is 6 inch and outside just over an inch. Hope this helps.
200tdi ayre Well-Known Member Feb 21, 2015 #8 Cheers owl Idon't think thats enough offset for what I want ; Looks like buybuying a set of offset steels and welding on beadlock rings ...
Cheers owl Idon't think thats enough offset for what I want ; Looks like buybuying a set of offset steels and welding on beadlock rings ...