200tdi ayre

Well-Known Member

• Feb 19, 2015

• #1

trying to reserch the offset of commercial D2 steel wheels, does anybody know ?

 

owl

Well-Known Member

• Feb 19, 2015

• #2

It's not in the manual is it, I have them on my build I could measure one if you are stuck.

 

200tdi ayre

Well-Known Member

• Feb 19, 2015

• #3

owl said:

It's not in the manual is it, I have them on my build I could measure one if you are stuck.

Click to expand...

ill have a look in a minute, but ill get back to you if not.

trying to work out what to do for my challenge wheels but need something with more offset than standard D2

 

200tdi ayre

Well-Known Member

• Feb 19, 2015

• #4

It just says 7j 16 in the handbook unfortunately

Which means they will be 9 inch with beadlocks which is about right.

If you could measure them that would be great

 

owl

Well-Known Member

• Feb 20, 2015

• #5

200tdi ayre said:

It just says 7j 16 in the handbook unfortunately

Which means they will be 9 inch with beadlocks which is about right.

If you could measure them that would be great

Click to expand...

I will have a look Sat PM

 

200tdi ayre

Well-Known Member

• Feb 21, 2015

• #6

owl said:

I will have a look Sat PM

Click to expand...

Cheers

 

owl

Well-Known Member

• Feb 21, 2015

• #7

Just measured one. Measuring from the inside of the naive plate too the rim not including the small bit of the flange that is turned over, inside is 6 inch and outside just over an inch.
Hope this helps.

 

200tdi ayre

Well-Known Member

• Feb 21, 2015

• #8

Cheers owl

Idon't think thats enough offset for what I want ;

Looks like buybuying a set of offset steels and welding on beadlock rings ...