M

matt101

Member

• Feb 12, 2019

• #41

Glow plugs have been replaced with new plugs and a new glow plug relay also fitted. I have checked and they are getting power with ignition on so assume these are working ok (the old plugs were knackered)

 

sierrafery

Well-Known Member

• Feb 12, 2019

• #42

Measure the voltage on fuse F1 engine bay while cranking when it refuses to start

 

M

matt101

Member

• Feb 12, 2019

• #43

Ok thanks I will test this tomorrow.
Your help is really appreciated with this. Will update with findings.

 

sierrafery

Well-Known Member

• Feb 12, 2019

• #44

Forgot to say check to be good connection at the earth points situated on that rail near the battery and if there is above 10.5V on F1 while cranking expose the ECU without unplugging it, use a needle to reach pin 3 of black plug from behind(brown/orange wire) and measure on that too

 

M

matt101

Member

• Feb 12, 2019

• #45

Thanks will do.
Iv just gone and had a quick to now to make sure i know where I'm looking tomorrow and I pulled fuse 1 out, I found that the fuse has got black areas on, I checked the others and found similar on most.
I have attached a pic of fuse 8.
What would cause this? None of them are blown but most show signs of black possibly burnt areas?

 

Attachments

• 
  IMG_4967.JPG

  158.7 KB · Views: 166

sierrafery

Well-Known Member

• Feb 12, 2019

• #46

It's a sign of wear after staying many years in an unfrendly environment like the engine bay

 

G

GrouchiD

New Member

• Jan 5, 2022

• #47

matt101 said:

Thanks will do.
Iv just gone and had a quick to now to make sure i know where I'm looking tomorrow and I pulled fuse 1 out, I found that the fuse has got black areas on, I checked the others and found similar on most.
I have attached a pic of fuse 8.
What would cause this? None of them are blown but most show signs of black possibly burnt areas?

Click to expand...

Hi All
Did resolve the issue? Having similar problem.
Any update would be of great.
Thanks