DLlandy
Member
Hi
I have a 2003 Disco 2 with a remap and tried copying the map with a Nanocom 1 and installing it on my new 2004.
It installs fine and drives just like the other one but creates a list of fault codes which i can't clear.
Load back the original map and all is fine. I'm now back with the original / factory map.
Would swapping the brains be a better option. Error codes listed below.
The TD5 ecu contain the following faults:
FAULT 08-01 air conditioning fan drive over temperature LOGGED
FAULT 08-02 fuel pump drive over temperature LOGGED
FAULT 08-03 tacho drive over temperature LOGGED
FAULT 08-04 gearbox/abs drive overtemperature LOGGED
FAULT 08-05 air conditioning clutch over temperature LOGGED
FAULT 08-06 mil lamp drive over temperature LOGGED
FAULT 08-07 glowplug relay drive overtemperature LOGGED
FAULT 10-01 air conditioning fan drive open load LOGGED
FAULT 10-02 fuel pump drive open load LOGGED
FAULT 10-03 tachometer open load LOGGED
FAULT 10-04 gearbox/abs drive open load LOGGED
FAULT 10-05 air conditioning clutch open load LOGGED
FAULT 10-06 mil lamp drive open load LOGGED
FAULT 10-07 glowplug lamp drive open load LOGGED
FAULT 10-08 glowplug relay drive open load LOGGED
FAULT 12-01 air conditioning fan drive open load CURRENT
FAULT 12-02 fuel pump drive open load CURRENT
FAULT 12-03 tachometer open load CURRENT
FAULT 12-04 gearbox/abs drive open load CURRENT
FAULT 12-05 air conditioning clutch open load CURRENT
FAULT 12-06 mil lamp drive open load CURRENT
FAULT 12-07 glowplug lamp drive open load CURRENT
FAULT 14-01 air conditioning fan drive open load CURRENT
FAULT 14-02 fuel pump drive open load CURRENT
FAULT 14-03 tachometer open load CURRENT
FAULT 14-04 gearbox/abs drive open load CURRENT
FAULT 14-05 air conditioning clutch open load CURRENT
FAULT 14-06 mil lamp drive open load CURRENT
FAULT 14-07 glowplug lamp drive open load CURRENT
Thanks
I have a 2003 Disco 2 with a remap and tried copying the map with a Nanocom 1 and installing it on my new 2004.
It installs fine and drives just like the other one but creates a list of fault codes which i can't clear.
Load back the original map and all is fine. I'm now back with the original / factory map.
Would swapping the brains be a better option. Error codes listed below.
The TD5 ecu contain the following faults:
FAULT 08-01 air conditioning fan drive over temperature LOGGED
FAULT 08-02 fuel pump drive over temperature LOGGED
FAULT 08-03 tacho drive over temperature LOGGED
FAULT 08-04 gearbox/abs drive overtemperature LOGGED
FAULT 08-05 air conditioning clutch over temperature LOGGED
FAULT 08-06 mil lamp drive over temperature LOGGED
FAULT 08-07 glowplug relay drive overtemperature LOGGED
FAULT 10-01 air conditioning fan drive open load LOGGED
FAULT 10-02 fuel pump drive open load LOGGED
FAULT 10-03 tachometer open load LOGGED
FAULT 10-04 gearbox/abs drive open load LOGGED
FAULT 10-05 air conditioning clutch open load LOGGED
FAULT 10-06 mil lamp drive open load LOGGED
FAULT 10-07 glowplug lamp drive open load LOGGED
FAULT 10-08 glowplug relay drive open load LOGGED
FAULT 12-01 air conditioning fan drive open load CURRENT
FAULT 12-02 fuel pump drive open load CURRENT
FAULT 12-03 tachometer open load CURRENT
FAULT 12-04 gearbox/abs drive open load CURRENT
FAULT 12-05 air conditioning clutch open load CURRENT
FAULT 12-06 mil lamp drive open load CURRENT
FAULT 12-07 glowplug lamp drive open load CURRENT
FAULT 14-01 air conditioning fan drive open load CURRENT
FAULT 14-02 fuel pump drive open load CURRENT
FAULT 14-03 tachometer open load CURRENT
FAULT 14-04 gearbox/abs drive open load CURRENT
FAULT 14-05 air conditioning clutch open load CURRENT
FAULT 14-06 mil lamp drive open load CURRENT
FAULT 14-07 glowplug lamp drive open load CURRENT
Thanks