Cornish landy

New Member

• Oct 22, 2018

• #1

Can someone advice.I believe that I have 24 spline on my half shafts that are connected to my diffs front and back on my 88 inch Series 3 land rover. All diffs that i see for sale i am told that they are 10 spline, is this referring to the output for the half shafts or is some other component that this 10 spline is referring to.

 

jamesmartin

Well-Known Member

• Oct 22, 2018

• #2

Cornish landy said:

Can someone advice.I believe that I have 24 spline on my half shafts that are connected to my diffs front and back on my 88 inch Series 3 land rover. All diffs that i see for sale i am told that they are 10 spline, is this referring to the output for the half shafts or is some other component that this 10 spline is referring to.

Click to expand...

all series diffs are 10 spline, it refers to the splines in diff gears half shafts fit into

 

Cornish landy

New Member

• Oct 23, 2018

• #3

if all diff gear half shafts have only 10 splines, why does mine have 24 spline on the driving member in the hub assembly.

 

jamesmartin

Well-Known Member

• Oct 23, 2018

• #4

Cornish landy said:

if all diff gear half shafts have only 10 splines, why does mine have 24 spline on the driving member in the hub assembly.

Click to expand...

all diff splines are 10 spline ,later series half shafts still are but drive member splines were changed as the finer spline is stronger,10 spline refers to diff end not outer end 24 diff splines didnt appear till about 92

 

Cornish landy

New Member

• Oct 23, 2018

• #5

So what I am looking for has I have to replace my diffs. I assume from your answers that I should have 24 on one end of my prop shaft and 10 on the other.?

 

tottot

Well-Known Member

• Oct 23, 2018

• #6

Yes, inner end of half shaft 10 spline and outer end 24.Why are you replacing your diff's ?