Bushtoy
Well-Known Member
just aswell i dint do the babelfish thing then. i'm sure they don't have an 'utter bollocks' sectioni know wot ee ment......tis in me 'ome language cerebral slob
Pikey
Dummy Ejection Facilitator..
Pipe fitter & fabricators You tend to find then on Petrochemical site oil refinaries and the like. I doubt you'll find a steel sewerage pipe supplier in the UK but most Big pipe fitting outfits will be able to get you one.
Or as SlobMeister says head for merkin land.
statin the obvious - it was in afrikans, or more precisely, dutch - so it was meant fur Bushbollock. I take yo point about the dollar tho, Slob. I mite have to find out how much.
anyone have a copy of LRO - spring 2007 - there is a write-up in there, apparently, on a RR diff pan how-to.
anyone have a copy of LRO - spring 2007 - there is a write-up in there, apparently, on a RR diff pan how-to.
Bushtoy
Well-Known Member
ek het een, maar ek sal dit liewers aan die brand steek foordat ek dit aan JOU gee, jou ou bosvark boknaai!!
ek het een, maar ek sal dit liewers aan die brand steek foordat ek dit aan JOU gee, jou ou bosvark boknaai!!
Quick update - these are only 12AWG wall thickness, but then only $3.75ea.F.O.B. Ohio
Pikey
Dummy Ejection Facilitator..
Nah there ****e. They're just dust/debris protectors for when the pipes are been transported. If you look on the thread you posted the link to and read down there's the ANSI spec no. and some info on where to locate the cap also known as weld caps in this country.
landrover901989
New Member
I use my landy for laning put it through some serious sh1t, been meaning to get a diff guard as i have already welded up the front axle as the diff pan had slightly cracked at the bottom where it had bent.
looking at the problem you guys are having with rusting behind the diff guard im gonna seam weld plate onto the front of the diff....
as for paint i highly recommend agricultural tractor paint, hard as nails water proof. better than hammer right.......
another job to do when i get round to it...lol.....
looking at the problem you guys are having with rusting behind the diff guard im gonna seam weld plate onto the front of the diff....
as for paint i highly recommend agricultural tractor paint, hard as nails water proof. better than hammer right.......
another job to do when i get round to it...lol.....
found a source of pipe caps in the UK - about £40 each - wall thickness .320" - thats wot I am going with - fix the prob once and fur all.
Butler Valves and Fittings Ltd
81 Gravelly Ind Park, Birmingham, England
Tel 0121 328 4333 Fax 0121 328 4555
www.butlervalves.co.uk
Butler Valves and Fittings Ltd
81 Gravelly Ind Park, Birmingham, England
Tel 0121 328 4333 Fax 0121 328 4555
www.butlervalves.co.uk
the thread is on the diff filler/drain plug is 3/4 NPT.
just the rear one - coz thats the worst - burri gorra "spare" one fur later
Hers a couple more ideas...
