H

highlandlandyman

New Member

• Jun 3, 2015

• #1

hi folks have a disco 1 which we have changed engine on for an other edc 300 including all the engine loom and the ecu from the donor disco engine will spin over but no fuel at the injectors have 12 v at the fuel soliniod fuel at the pump but not the injectors any ideas thanks

 

Dippypud

Never Knowingly Understood

Full Member

• Jun 3, 2015

• #2

highlandlandyman said:

hi folks have a disco 1 which we have changed engine on for an other edc 300 including all the engine loom and the ecu from the donor disco engine will spin over but no fuel at the injectors have 12 v at the fuel soliniod fuel at the pump but not the injectors any ideas thanks

Click to expand...

Lift pump ?

Clear tube to follow fuel flow ...

 

MGBGTV8

Active Member

• Jun 3, 2015

• #3

As above. If the lift pump is knacked you'll not see any fuel at the injectors.
There is a priming lever but it only works if the cam is set at a certain point. Otherwise it does precisely dick all.

 

E

eightinavee

Well-Known Member

• Jun 4, 2015

• #4

Put the original ecu back in and it will go.The engine ecu is NOT coded to the engine,but it IS to the alarm ecu in the car.The "new" engine ecu you have fitted will not recognise the alarm ecu and therefore not allow fuel.

 

E

eightinavee

Well-Known Member

• Jun 23, 2015

• #5

Yawn.... So did anyone bother trying to get this thing to go ? Answering peoples problems becomes tedious when they don't bother with an answer...