Pikey
Dummy Ejection Facilitator..
Magnet?? try throttling it?? I dunno. Why is you so far from Home?? & where are yu?? Someone close by might bt able to offer ya a lift home if nowt else
davek0974
Well-Known Member
Why should it be over fuelling?
Has the pump been tweaked?
If so just put it all back to where it was to start with, you did mark the diaphragm position didn't you before advancing it?
Of course, if you didn't touch it, then it would be the last thing on my list of smoking cures, what colour smoke?
Has the pump been tweaked?
If so just put it all back to where it was to start with, you did mark the diaphragm position didn't you before advancing it?
Of course, if you didn't touch it, then it would be the last thing on my list of smoking cures, what colour smoke?
Look at the screw on the back of the pump is the locking ring still fitted its spot welded to the bolt threads.
On the taper bit you should be able to see where the pin has been running as it leaves a mark, more than one mark means someones been messing
Lynall
On the taper bit you should be able to see where the pin has been running as it leaves a mark, more than one mark means someones been messing
Lynall
