Coffeelandy · Mar 25, 2017

Landyfox said:
Such a helpful thread

A pleasure to be of rare assistance on here I'm normally the bloke asking for help.

lcbandit · Apr 11, 2017

really must get round to wiring the heated part of my seats!! not sure it would end up working though!

NoobieRover · Apr 11, 2017

Wonder how tough to fit these in a classic 95

Co-Pang-Yang · Apr 11, 2017

NoobieRover said:
Wonder how tough to fit these in a classic 95

Can't be that difficult, more room than in a Defender.
At that's what I'm hoping when I get round to putting my set in my Disco.

Coffeelandy · Apr 11, 2017

lcbandit said:
really must get round to wiring the heated part of my seats!! not sure it would end up working though!

Me too! I bought switches and haven't got around to it yet. My seat movement works perfectly so the heaters should do. I'll hook them up first to test them before making holes in the dash for switches.

huffhuff · Apr 11, 2017

NO reason why they shouldn't work if you follow the wiring details in this thread.

My bum was nice and warm this winter

NoobieRover · Apr 12, 2017

Co-Pang-Yang said:
Can't be that difficult, more room than in a Defender.
At that's what I'm hoping when I get round to putting my set in my Disco.

Might look for a set soon at a pull apart and try it out

Coffeelandy · Apr 12, 2017

NoobieRover said:
Might look for a set soon at a pull apart and try it out

There's a place in Plymouth where I got mine from that solely break MX8 s I'll try and get the number Mate.

Daz · Apr 22, 2017

Just followed these instructions and we'll pleased with my new seats. Paid £50 on ebay for them.

Daz · Apr 22, 2017

Coffeelandy · Apr 23, 2017

Daz said:
View attachment 121988

Brill. I've got the leather electric ones same shape though. Transforms the drive as you're held in place rather than rolling around.

Skolmate · Jun 17, 2017

Coffeelandy said:
I'll PM you the number of the bloke I got mine from, he breaks RX8s solely and has loads and can get more. I paid £100 for mine including the 2 rears which you can sell on.

Do you know If those back seats will fit into a 110CSW? If I could have his number that would be lovely please?

Coffeelandy · Jun 18, 2017

Skolmate said:
Do you know If those back seats will fit into a 110CSW? If I could have his number that would be lovely please?

No they won't just drop in as the front ones do. You'd need to build a frame for them from scratch but even then I think they're so low slung they just wouldn't work.

payydg · Jun 18, 2017

Planning on doing this in the coming months.

Will a middle seat with seat belts still fit?

Coffeelandy · Jun 19, 2017

payydg said:
Planning on doing this in the coming months.

Will a middle seat with seat belts still fit?

I think it will. I have a cubby box there instead but there is plenty ty of space either side. You'd need to ask if anybody has done it on here for a fefinitve answer.

payydg · Jun 21, 2017

Thanks, will do.

Glyn D · Jun 10, 2018

Has anybody done this with a middle seat yet? Any chance you could post some photos?

goldypurple · Jun 11, 2018

can you fit the Mazda seats in a 110 DCPU? I'd like to change the front seats only.

tia

Coffeelandy · Jun 11, 2018

Glyn D said:
Has anybody done this with a middle seat yet? Any chance you could post some photos?

Not enough room Mate.

Dr0v3r · Jun 6, 2019

Coffeelandy said:
Here you go Mate try and expose some wire and use this guide below to work out which is which. One thing I did suss out with these seats is that they go so far forward that you don't need to remove the seat base to access the boxes beneath for battery and jack etc.

Seat Motion
Grey - +12v
Purple - Ground

Lumbar
Yellow w/red stripe - +12v
White w/yellow stripe Ground

Seat Heater
Blue - +12v

Passenger seat
Seat heater
Red +12v
Black - ground

Heated seats work, 12v is 12v, just have a on off switch in line so they do not burn out

Great post this, just got some RX8 seats so planning how to go ahead and fit/wire them up.
I have identified those wires quoted above, but what are all the other wires for. I see the yellow plug for the airbag, but there are still several others going into the main plug, what are they for?
Also what about the airbag? Does it need to be removed? Will it go off in a crash, or worse when off roading?

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Active Member

Well-Known Member

New Member

Similar threads