stevieb42
New Member
Cannae wait tae try it wi' the kilt on....MMMMMMMMMMMMM LEATHER!!!!!
careful , you`ll have them all wanting them now
This lot are bad enough without giving them ideas
careful , you`ll have them all wanting them now
This lot are bad enough without giving them ideas 
bustersbus
Well-Known Member
careful , you`ll have them all wanting them now
bustersbus
Well-Known Member
Just a wee progress report.
Bracketry cut, drilled, tapped, welded and painted....
Made a big long T-bar out of box section to slide throo the bracketry, which also slides throo the back feet of the seats...
Bracketry cut, drilled, tapped, welded and painted....
Made a big long T-bar out of box section to slide throo the bracketry, which also slides throo the back feet of the seats...
bustersbus
Well-Known Member
Front seat frame welded, drilled, painted and bolted to what's left of the original tubes that I cut down....
bustersbus
Well-Known Member
Seats bolted to bracketry. To take seats out, just undo the bolts on the seat frame and pull out T-bar. These seats ain't goin' anywheres Just need to sort out summit for securing the top of the seats and modify the centre seat lap belt!!!!
Just need to sort out summit for securing the top of the seats and modify the centre seat lap belt!!!!
bustersbus
Well-Known Member
OOOPS!!! forgot the piccies
stevieb42
New Member
that answered that thenJust need to sort out summit for securing the top of the seats and modify the centre seat lap belt!!!!
bustersbus
Well-Known Member
Still tryin' tae suss oot the back, but may have a couple of ideashell of a lot of work just for some seats
Looks to me as if your about ready for fitting , cant be that much still to do , have you found a way to secure the back ?
It does seem a lot of work, but it would've bin a lot easier if ah knew what ah was doin'. next time (if there is a next time) will be easier Gives me summit tae do of an evenin' tho'
bustersbus
Well-Known Member
bustersbus
Well-Known Member
hell of a lot of work just for some seats
Certainly worth it tho', tried them out today and what can ah say.....
Comfy as owt and a bit of spring tae them, never felt the bumps
bustersbus
Well-Known Member
cheerscertainly look the part , maybe Land Rover should take note
stevieb42
New Member
Well that takes the fun out of landy driving , does it notComfy as owt and a bit of spring tae them, never felt the bumps
bustersbus
Well-Known Member
No wi' my back it don'tWell that takes the fun out of landy driving , does it not
headin' down tae Ilkley or Harrogate next week, so they'll have wee test tae see how they feel on a longer journey
bustersbus
Well-Known Member
aye, cheers StevieNice to see a thread with pics in it , gives a better idea of what your doing and might help/encourage other to try the same thing . Hope you enjoy the seats as much as i`ve enjoyed watching your work
bustersbus
Well-Known Member
Ah'm sure ah will cos there's a pub at the end of itenjoy your trip to the "flat end " of the country , just dont bring any of them back with you
Made a mistake aboot when ah'm gan, it's no till the 18th!!!Ah'll huvtae make sure the bus is well secure and check there's no buggers sneak in the back
