L

LizB

New Member
Hi. i'm new to this forum. I've got a defender 90 j reg with a knackered engine and have been offered a defender 300tdi engine from a 1997 model. Will this be ok to fit without too many differences? Also there is a 200tdi engine on offer from a disco would that be ok too?
 
You probably wont have space to fit them both...i'd go for the defender 300...and sell the disco engine, they get good money if fine.
 
Storm's right again I'm afraid, you definately won't have room for both engines ... you would probably need two Defenders and then you could put one in each!

:welcome2:
 
Andy Land said:
Storm's right again I'm afraid, you definately won't have room for both engines ... you would probably need two Defenders and then you could put one in each!

:welcome2:
Click to expand...

You make it sound like a seldom occurrence :confused::confused:

Besides, i'm coming to live in Warwick soon so be nice or i'll wee in your fuel tank. :p
 
Andy Land said:
you would probably need two Defenders and then you could put one in each!

:welcome2:
Click to expand...

I reckon you'll get away with one defender, and one discovery, ;););):rolleyes:
You'll have to check with Storm though as he appears to be right about stuff at the min:p:p:p:p:D
 
Besides, i'm coming to live in Warwick soon so be nice or i'll wee in your fuel tank. :p[/QUOTE]

That's fine Storm, can you do bio-wee? ... it'll be a lot cheaper!! :p
 
Grimmer said:
I reckon you'll get away with one defender, and one discovery, ;););):rolleyes:
You'll have to check with Storm though as he appears to be right about stuff at the min:p:p:p:p:D
Click to expand...

Yeah I guess you're right there, makes me a little nervous if Storm's coming to town as there isn't room for all this 'being right too often' nonsense round here! :D:D
 
Andy Land said:
Oh yes ... do you think you'd need to remove the existing engine before fitting the two new ones? All sounding like more than an hours work now :doh:
Click to expand...

Mmm not to sure on that would have to take some measurments maybe remover inner arches ??
 
You Could remove the exsiting engine,

Put the 300tdi in the front driving the front wheels
and the 200tdi in the rear tub driving rear wheels.... it would need a little bit of modification but not much...... :p
 
Agree ingenious Sam - and like certain German cars, the weight distribution would be balanced:D

Would also solve the issue many of us have of cold cabins in winter:D:D:D
 
Station House said:
Agree ingenious Sam - and like certain German cars, the weight distribution would be balanced:D

Would also solve the issue many of us have of cold cabins in winter:D:D:D
Click to expand...


Indeed i think cornering ability would improve dramtically with the even weight distribution and the lower center of gravity.:p

Im sure if you mounted the second radiator to the front of the tub bulkhead it would make a perfect heater!! just have to watch your elbows!! :D
 
You must log in or register to reply here.

Similar threads

K
Steering Box regognised!!!!!HELP!!!
Replies
8
Views
460
Anaconda
A
dag019
300tdi conversion with LT77 box
Replies
0
Views
412
dag019
dag019
Shelly crane
Leak from underneath defender 90
5 6 7
Replies
129
Views
14K
Squonker
S
J
Electrics and engine cuts out for a couple of seconds.
Replies
1
Views
533
tottot
tottot
S
Engine swap ideas
2
Replies
30
Views
5K
300bhp/ton
300bhp/ton