life2short
New Member
Very easy to do yourself. Use an external mastic. Remove old glass by running sharp blade around old seal. Be careful not to break glass!
steve bain
New Member
piece of ****. easy as you like.
steve bain
New Member
ignore what i said. i thought you were asking how easy to swap ali to ali. not sure about you want to do. sorry
steve bain
New Member
read it again. will the new door have ali strips too? if so, easy. if not i think the glass is different
RedditchJay
New Member
I AM about to do exact same BUT i want to remove the window anyway in the new door {from Paddocks £131} so I can get it to the painters
Ruari
Active Member
I just put glass into mine as previous owner welded! in a steel plate. That was a b***h so I expect removalof glass tobe really easy. Take the door off for the job. Fitting alistrips- i used rivets and for thhe glass marine grade silicone (It sticks like poo and olds te yachties windows insoit'sgoodenough for me) I got my glass with ali strips,2 other back windows and heater switch all for £30 from local scrappy.
steve bain
New Member
i got a whole bloody door with glass already in it for £30!!
Ok so it currently has self tapers all round the ali strip so guessing you remove those and cut as much of the mastic out as possible (as life to short said). Then remove glass. Getting the new safari door for £95 plus vat from mm4x4.
Hoping the glass will fit the new unit and drill and rivit the ali in to the new door?
Cheers
Hoping the glass will fit the new unit and drill and rivit the ali in to the new door?
Cheers
wiltshire landyman
I’m back
took mine out when i resprayed it..removed ali strips cut out silicone glass came out piece o ****..
fitting back is just as easy...30 min job tops
fitting back is just as easy...30 min job tops
