Got all sorts of stuff starting to collect
New hinge pin kit for the air vent flaps on the front
Rivnut gun
Fibreglass to repair a couple of holes on the passenger door frame
New door hinge kit, no idea why ones a different colour, will be painted anyway
Paint touch up, to find a colour close to the vinyl to paint bits like the hinges. This one is pretty close - BMW Sparkling Graphite
Spat clips for the flexible wheel arches
New hinge pin kit for the air vent flaps on the front
Rivnut gun
Fibreglass to repair a couple of holes on the passenger door frame
New door hinge kit, no idea why ones a different colour, will be painted anyway
Paint touch up, to find a colour close to the vinyl to paint bits like the hinges. This one is pretty close - BMW Sparkling Graphite
Spat clips for the flexible wheel arches
Tonights little task was to remove the air cleaner and hoses, and waterproof it all, as you will see its not exactly waterproof from the factory
Heres all the bits
oh and this, I guess its not very waterproof anymore
First up was to waterproof the join between the plastic housing that sits on the rear of the wing, Sikaflex was used through out all this.
Then attached that piece on
Then sealed the plastic piece that push fits into the back of that
The two bits attached on
Sealed up the rubbish water drain valve here
And here
Applied a smear to the crimp join around the end of the can, mine looked fairly tight but just a precaution
Then sealed the snorkel to the wing
Should be fairly water tight :thumbs:
If anyone knows the part number for that split bit of hose that would be amazing or show me where to get one
Heres all the bits
oh and this, I guess its not very waterproof anymore
First up was to waterproof the join between the plastic housing that sits on the rear of the wing, Sikaflex was used through out all this.
Then attached that piece on
Then sealed the plastic piece that push fits into the back of that
The two bits attached on
Sealed up the rubbish water drain valve here
And here
Applied a smear to the crimp join around the end of the can, mine looked fairly tight but just a precaution
Then sealed the snorkel to the wing
Should be fairly water tight :thumbs:
If anyone knows the part number for that split bit of hose that would be amazing or show me where to get one
Allyipod
Active Member
Think you are looking for ESR3028
But check it for your self here
Land Rover Ninety / Defender 90 Parts Book - Land Rover Technical Blog
But check it for your self here
Land Rover Ninety / Defender 90 Parts Book - Land Rover Technical Blog
Allyipod
Active Member
It was 3028 that was split on mine. From the parts book you will know what it is you are looking for. Great job looking forward to reading more. Keep up the good work....
Got the rest of these bits wrapped, but first up was to etch primer all my new hinges and bulkhead to windscreen frame brackets
Ordered some Rustoleum enamel type anti rust black paint for these.
First up to wrap this
Then this, youl notice a new defender badge on there
Both bits
Checker plate and vent cover back on
So everything on that side of the car is ready to go back on the car tomorrow
Ordered some Rustoleum enamel type anti rust black paint for these.
First up to wrap this
Then this, youl notice a new defender badge on there
Both bits
Checker plate and vent cover back on
So everything on that side of the car is ready to go back on the car tomorrow
Last edited:
Other jobs I did today, fit the axle breathers
Heres the old ones
Ran all the pipework into the engine bay and into a 5 way manifold, more pics of that tomorrow
My fibreglass repair of the door frame, bit of a bodge but should keep this door going for a while longer
coat of oxide paint
Then moved onto fitting the replacement door that iv had wrapped for a while
The old door and corrosion
Off
New one on
Need to get some checkerplate trim panel for this
New hinges
Heres the old ones
Ran all the pipework into the engine bay and into a 5 way manifold, more pics of that tomorrow
My fibreglass repair of the door frame, bit of a bodge but should keep this door going for a while longer
coat of oxide paint
Then moved onto fitting the replacement door that iv had wrapped for a while
The old door and corrosion
Off
New one on
Need to get some checkerplate trim panel for this
New hinges
