The Mad Hat Man

Well-Known Member
LZIR Despatch Agent
wanted to rebuild a garden retaining wall about 30feet long (concrete with brick facing); as old one is falling apart.

44600d1366717833-decent-bricky-photo.jpg
 

Attachments

  • photo.JPG
    photo.JPG
    181.1 KB · Views: 343
Last edited:
Actually that wall is only 15-20 years old. I believe the problem is because cheap "London" facing bricks were used :mad:

Because it is only single skin it has absorbed water like a sponge and then frost has blown it all apart.


Not only that.... I is still working. I ain't retired yet. Not by a long way :(.
 
Last edited:
Actually that wall is only 15-20 years old. I believe the problem is because cheap "London" facing bricks were used :mad:

Because it is only single skin it has absorbed water like a sponge and then frost has blown it all apart.


Not only that.... I is still working. I ain't retired yet. Not by a long way :(.

not very good then is it.is it at your home ???
 
Actually that wall is only 15-20 years old. I believe the problem is because cheap "London" facing bricks were used :mad:

Because it is only single skin it has absorbed water like a sponge and then frost has blown it all apart.


Not only that.... I is still working. I ain't retired yet. Not by a long way :(.

soft brick/clay, not good fired brick
 
Facing bricks should not be used on garden walls, the water gets in, freezes n blows the face off.. The coping looks ok, so try n clean them up if pos, cos they cost a bit.. Use some decent stockies with a weather struck joint and it will look good n last well. I would do it for you but I am flat out now..
 
I would say the coping looks like its seen better days and that is probably a big contributory factor in why the bricks have blown. The coping looks like old clay cants. London (stock:p) bricks are not the best for garden walls.

I would use either a good clay 'best', concrete or an engineering brick.

I would also think about having a decent coping in either concrete like a saddle back or an engineering quality brick.

I will now go and get a life :eek:
 
Copings are fine.
Its the brick that are crap.
Does no-one fancy a job?

dig it out, lay a concrete retaining wall and then brick face with Engineering bricks? Is it that difficult?

Mind yu I am a stickler for getting it correct :eek:
 
Copings are fine.
Its the brick that are crap.
Does no-one fancy a job?

dig it out, lay a concrete retaining wall and then brick face with Engineering bricks? Is it that difficult?

Mind yu I am a stickler for getting it correct :eek:

do it yourself mhm,or knock it down,dig the footings etc etc.save on the labour costs.
 

Similar threads