Europa486
Well-Known Member
Clock is easy, flat screwdriver under the side of the clock and it pops out,
Single bulb on rear,
But with the heater controls you have to remove the centre consol which is quite straight forward,
Pull the knobs of the heater sliders and four screws to hold the heater control facia then you can get at the bulbs,
Single bulb on rear,
But with the heater controls you have to remove the centre consol which is quite straight forward,
Pull the knobs of the heater sliders and four screws to hold the heater control facia then you can get at the bulbs,
Cw2788
New Member
Thank you will have a go!
