N

New Dexter

Member

• Aug 15, 2020

• #1

I have an ex-utilities 110 fitted with the cubby lockers under the floor and behind the driver's seat. Unfortunately I wasn't given keys and while I was able to remove the locks easily I still need new ones as cannot use them. Does anyone know a good source for these please?

 

marjon

Well-Known Member

Full Member

• Aug 15, 2020

• #2

Something like this https://rimmerbros.com/Item--i-562116


J

 

N

New Dexter

Member

• Aug 15, 2020

• #3

Thank you. Rimmer Bros are not far from me. Can the long lever at the back be unscrewed and replaced with what's on the old locks?

 

marjon

Well-Known Member

Full Member

• Aug 15, 2020

• #4

I have never seen one so can’t say for sure.
I would thinks they are held on in a similar way screw/nut, but would depend on shaft shape. But you could always fettle the new ones to what you need. Think there are a few different one’s available so maybe worth more of a search. Or if close at least a hands on visit with yours to compare.

good luck

J

 

brianp38dse

Well-Known Member

• Aug 16, 2020

• #5

Have a look on fleebay they are just cabinet locks ilik these and a lot cheaper than rimmers, you should be able to find sets
https://www.ebay.co.uk/itm/2-4-Set-...=254685204862a6a3c5af1a2e408895e76194910b679b