Hi everyone (first post)
I have a disc TD5, year 2000.
I have done a diagnostics test to find what is causing my engine warning light to come on. Faults that came up were:
20 Air flow circuit fault
83 High speed crank sync lost fault
87 Noisey crank signal detected
92 Exhaust gas recirulation valve stuck closed.
Cleared these faults to start from fresh. The only one that came back up was
83 High speed crank sync lost fault.
It runs and drives, cuts out now and again and feels underpowered. I have read in a few posts that with a faulty crank sensor it shouldn't run at all.
Any advice please.
I have a disc TD5, year 2000.
I have done a diagnostics test to find what is causing my engine warning light to come on. Faults that came up were:
20 Air flow circuit fault
83 High speed crank sync lost fault
87 Noisey crank signal detected
92 Exhaust gas recirulation valve stuck closed.
Cleared these faults to start from fresh. The only one that came back up was
83 High speed crank sync lost fault.
It runs and drives, cuts out now and again and feels underpowered. I have read in a few posts that with a faulty crank sensor it shouldn't run at all.
Any advice please.