08mckerp

New Member
2 things. Anyone no where to get a bolt for a 1989 90 pandhard rod / the part number??

Also anyone got any tips on how to get the section of wiring loom inside the chassis leg. dont wanna just cable tie it on the outside as could potentially get ripped off.

Cheers
 
Last edited:
attach small weight to string, stand chassis on end (hassle i know, but not if you have a pulley wheel etc..) and drop and hopefully wiggle its way down to other hole then pull loom back with string!
 
These any guid tae ye...

radiusarms.jpg

panhard.jpg


Just a wee thought about yer loom... if ye can't get it through with some stiffish wire as a giude, ye could always think about some plastic tubin' / blue water pipe fixed on top of the chassis;)
 
cheers. also lookin for the rubber gromets in the chassis that go the wires running from the bulkhead to the rear crossmember go thru. if anyone can suggest sumwhere to get them or what to search from plz help :D
 
cheers. also lookin for the rubber gromets in the chassis that go the wires running from the bulkhead to the rear crossmember go thru. if anyone can suggest sumwhere to get them or what to search from plz help :D
That might be a tricky one mate. When ah replaced me rear loom ah just cut through one side of the grommets and stuck them back in when ah replaced the loom.

cheers buster!!

Ye're welcome;):D
 

Similar threads