Hi all...ive seen some 19" range rover sport alloys, think i read somewhere on here that the p38 wheel bolts dont fit, if they dont wot bolts do i need guys??l322?
They are nuts not bolts, couple of different sizes for L322 wheels depending on year. You will also need four reduction spigots, because L322 wheels are larger where they fit over the hub.
You're talking about those little plastic spacer things?
I think the tyre profile is different on the L322 too so you'd have to go for a lower profile tyre to make sure the speedo reads right.
The L322 ones I saw were too high a profile - I checked. They're on a P38 though, a 4.0 as it happens. I think they're Range Rover Sport Y alloys but I don't really pay much attention to wheels. I'm interested in how symmetric they are, how resilient and how decent the ride is. Looks are secondary.
I draw your attention to post #7 in this thread.....
http://www.landyzone.co.uk/lz/f10/wheel-nuts-272094.html
Also the wheels Grrrrrrr refers to I believe are these....
Which are the ones referenced in the above thread where I had to get the wheels nuts turned down!
And fitted to the hubs are plastic 'spacers' to ensure the L322 rims fit concentrically to the hub!
What size wheels are they Ant and what profile tyres?
19 rims with 255/55....
24mm bolts.
Both of our P38's have sport wheels on. As said, you will need to get spigot rings as well.
255/55 19 Tyre size.
picture here : Land Rover Zone - ukadamwest's Album: P38 Blue - Picture
i were talking nut head size wammers