F

fsteward

New Member

• Dec 20, 2010

• #1

hi i have got a 2.5td p38
but i have put the heating on when the engine is warm
and it blows hot air out of the passangers side
but only cold air on the drivers side
both nob settings are on hot but it still blows cold please help it frezzing

 

P

p38on22s

New Member

• Dec 20, 2010

• #2

yep its a blend motor what controls the flap inside mines the same and meant to be a pain in the backside to do hence not done mine (2 3/4 years)

 

F

fsteward

New Member

• Dec 20, 2010

• #3

so what do i need to replace the whole blend motor

 

jt_armstrong

Well-Known Member

• Dec 20, 2010

• #4

fsteward said:

so what do i need to replace the whole blend motor

Click to expand...

Try this.

Blend Motor Diagnosis and Replacement

 

discomalc

New Member

• Dec 20, 2010

• #5

Bit the bullet with mine and took it to my local independent to do after lots of consideration about doing it myself. Glad i did given the present weather. He replaced all 3 motors and showed me the old wiring were someone had obviously tried to do the job themselves previously. Wonder the whole thing hadnt gone up in flames, bits spliced in and taped up everywhere bare bits of wire hanging around.
Cost me best part of £600 but all working well now and im nice and toasty all the time