border
Well-Known Member
Yes that makes sense, dont think the Army would have used them if they were no good.
Will emai Paddocks to see which parts to use with it.
Will emai Paddocks to see which parts to use with it.
border
Well-Known Member
Thanks Need to make sure before I go and order bits.
Might be easier to change pressure plate if that is possible.
gemsdad
NOT BOTHERED.
Feckin useless cnut you are Bobsticle,i left messing about with landrovers to the REME,they are the grease monkeys,my job was to blow crap up and do lots of other stuff to kill the ruskies,far far more interesting,anyone want a bar mine layer,lol.
border
Well-Known Member
Please tell me this is right got clutch kit today , Im certain the plate is centralized ok, but when I fitted the cover it would not line up at all with the 2 dowels, only way it would go was to put one of the dowels in the hole but the other was not in any, first pic is bottom dowel in hole, second shows dowel not in any hole. everything is flush up against flywheel with no gaps though, bolts are just nipped , not torqued yet.
On the Origional earlier 3 prong cover plate both holes lined up to both dowels,
On the Origional earlier 3 prong cover plate both holes lined up to both dowels,
Attachments
border
Well-Known Member
So should they all Line up in to holes ,Mines got three dowels
border
Well-Known Member
Yes mine has those same 3 holes on cover but only 2 dowels on flywheel and the centre hole fits either top or bottom in pic , but other does not line up. the bolt holes only line up when one of the dowels are in either centre hole, if you get what I mean.
Attachments
Bobsticle
De Villes Advocaat
It looks like the flywheel is different also.
I’d back pedal a bit and get a pressure bearing that works with your first set up. They must be around and must work.
The clutch cover and flywheel must be balanced or it’s going to drive like a pair of trainers on full spin.
I’d back pedal a bit and get a pressure bearing that works with your first set up. They must be around and must work.
The clutch cover and flywheel must be balanced or it’s going to drive like a pair of trainers on full spin.
border
Well-Known Member
Showed the mechanics pics at landy place and they agree that flywheel was set up for clutch that came with it, But and they said that the dowels are just to locate it and as long as the 6 bolt holes line up and everything is is in place which it is, that I should just get rid of that bare dowel and tourqe it up.
