boatlifter

New Member
hi could anyone enlighting me the clunking sound when pull away or rock my 90 back and forward coming from what sounds like back diff:confused:
 
hi could anyone enlighting me the clunking sound when pull away or rock my 90 back and forward coming from what sounds like back diff:confused:

you sure its the axle and not the uj slop?
what ages is the 90? could just be ware in general , i had the same with my old 1987 90 ended up buying a pair of 300tdi fender axles (they were so bad at the end i was going through uj's in about 6/7 months )
 
its a 53 plate when you rock it the truck moves before the prop moves could be uj slop if so what remedies that

new UJs of course
but my money is on the A Frame ball joint.
UJs tend to cause vibration / rumbling, rather than clunking.
 
kinell, they aint cheap.
hope you got under there with a pry bar to confirm before ordering!

also hope you didn't order a Britpart one - last one I fitted lasted 6 months.

Buster done a write up on how to fit it btw.
 
I did wonder :confused: - have yu looked at this.....?

tre76rs.jpg


from TRE76RS Heavy Duty Adjustable A Frame Ball Joint
 

Similar threads