alexc2701

Active Member

• Nov 4, 2017

• #21

I'd go light grey if was doing again, can see any grime to wash off and someone on here did the axels in it and it looked really good

 

C

Colthebrummie

Well-Known Member

• Nov 4, 2017

• #22

paulski1 said:

havent thought about silver,looks nice.think if people looked under at the chassis like they always do would be a good wow factor in white,i dont want it to look tacky tho

Click to expand...

Where do you live where people keep looking under the vehicle at your chassis? Lilliput?

Col

 

G

GATSO

Well-Known Member

• Nov 4, 2017

• #23

my axles are grey looks mint ,,,,I'm only 24" tall though so most stuff looks mint

 

P

paulski1

Member

• Nov 4, 2017

• #24

what make paint did you use on your axles?

 

David_Cooper

Active Member

• Nov 5, 2017

• #25

Silver looks great. The only thing I would say, is that it may attract unwanted attention. My pal painted his new galvanised chassis black as soon as it was delivered -his thoughts being he didn't want to advertise the fact there was a perfect £2k chassis there with no VIN stamped on it...

 

TorsionBhudda

Well-Known Member

• Nov 5, 2017

• #26

I done mine in DAF Grey looks great

 

G

GATSO

Well-Known Member

• Nov 5, 2017

• #27

paulski1 said:

what make paint did you use on your axles?

Click to expand...

tractor enamel from ebay

 

L

lynall

Well-Known Member

Full Member

• Nov 6, 2017

• #28

TorsionBhudda said:

I done mine in DAF Grey looks great

Click to expand...

Did it peel/fall/wear off just like on the Dafs

 

P

paulski1

Member

• Nov 6, 2017

• #29

TorsionBhudda said:

I done mine in DAF Grey looks great

Click to expand...

think i'v seen your pics,does look good,i think i may go down the enamel route on the chassis but im leaning towards raptor on the axles and rods,im also going to send the axles of to get galvanised

 

TorsionBhudda

Well-Known Member

• Nov 6, 2017

• #30

lynall said:

Did it peel/fall/wear off just like on the Dafs

Click to expand...

I'll tell you in a couple weeks when it's back on the road

 

P

paulski1

Member

• Nov 13, 2017

• #31

what would you lot go for enamel,2pac or a proper chassis paint?

 

allan downes

Well-Known Member

• Nov 15, 2017

• #32

hi i used por 15 4 stage paint silver and overpainted with silver hammerite it seems ok

 

allan downes

Well-Known Member

• Nov 15, 2017

• #33

thats unerneath alot of work though

 

P

paulski1

Member

• Nov 16, 2017

• #34

wow allan that looks lovely,i have seen that por 15 silver does it need overcoating was thinking of just that then maybe a clear waxoyle

 

allan downes

Well-Known Member

• Nov 16, 2017

• #35

Hi have a look on frost products. the p o r 15 on thier site but do follow the instructions and prepwork is the key. As a few people have not .and it peeled off. You have to rub it down then use thier cleaner its good.then thier metal prep and i used the direct to metal paint and then topcoat. And i gave it 2 coats of hammerite on top. . But dinitrol , waxoil is fine

 

P

paulski1

Member

• Nov 16, 2017

• #36

ok ill check that out,im waiten for a galvanised chassis so only need to degrease then etch prime,but im going for a silver colour,was thinking of white but was told it can look cak after a while