ySo · Jul 2, 2014

I have a 96 p38 2.5TD with grey leather seats (heated seats, manually adjustable).

I want to put in black seats, but the only ones I can find are electric. Is it possible to get the electrics working and how?

Thanks

fanatic · Jul 2, 2014

Check bcem is Highline, been covered many times before

Datatek · Jul 2, 2014

fanatic said:
Check bcem is Highline, been covered many times before

As above, but they can also be made to work without the BECM if you are handy constructing relay assemblies.

ySo · Jul 2, 2014

how do I check if it's highline?

flossdog · Jul 2, 2014

Mine has an H on it....the one I took out had an L. Fitted the H and seats worked right off.
Cheaper to wire them up I would have thought..

gfromleeds · Jul 2, 2014

The becm under the drivers seat has H or L on the top if its a H you may need to get the wiring loom too but should just plug in and work but if its a L you will need to construct a relay assembly (not easy unless your good at electronics)
The other option if its a low is to swop the covers onto your manual seat bases not a small job eather but easyer than the relay idea

Grrrrrr · Jul 3, 2014

My DT has a Lowline BECM. Suspect yours will be too.

P38Penguin · Jul 4, 2014

My DSE has a lowline one too, you may have to rub a decade or two's worth of dust off.

ySo · Jul 4, 2014

Whereoon it is this h or l meant to be, can't see it.

Datatek · Jul 4, 2014

ySo said:
Whereoon it is this h or l meant to be, can't see it.

Paper label on the top of mine.

ySo · Jul 4, 2014

Sweet mine has a H on it! Does that mean electric seats can just plug straight into it?

wammers · Jul 4, 2014

ySo said:
Sweet mine has a H on it! Does that mean electric seats can just plug straight into it?

If you have the harnesses.

ySo · Jul 4, 2014

What is the harnesses? The plastic bases the seats sit on?

wammers · Jul 4, 2014

ySo said:
What is the harnesses? The plastic bases the seats sit on?

Oh dear me. No the wiring harneses to plug into the BECM that the seats plug into the other end of.

ySo · Jul 4, 2014

Thought that would be part of it.

Rick-the-Pick · Jul 4, 2014

There's two looms you need off the top of my head. One goes to the passenger side & then it returns to the drivers, but wammers or datatek can confirm this.
If the numbers have rubbed off the becm & the range rover has a sunroof, it's a H highline.

gfromleeds · Jul 4, 2014

My dt dont have a sunroof but has got climate control so has a high line becm

wammers · Jul 4, 2014

A couple of different looms depending on seats. Just electric heated seats or memory seats. Think only the later one with memory is available these days. So if anybody buys seats make sure you get the loom with them.

ySo · Jul 4, 2014

buying a full set of black leather electric seats, wiring harness included and all interior panels to make it match, got a pretty good deal for the lot shipped, seats are in mint condition

Grrrrrr · Jul 4, 2014

gfromleeds said:
My dt dont have a sunroof but has got climate control so has a high line becm

My DT has climate control (thought they all did) but still Lowline BECM.

New Member

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Well-Known Member

New Member

New Member

Well-Known Member

Technician, Bodgit & Scarper Ltd

Active Member

New Member

Well-Known Member

New Member

No longer with us, RIP

New Member

No longer with us, RIP

New Member

Active Member

Well-Known Member

No longer with us, RIP

New Member

Technician, Bodgit & Scarper Ltd

Similar threads