Sirus
Your all Banned except me
That was where mine was, but you dont need to cut the plastic, just loosen the screws off slide it in and tighten up screws. if you cant hear it you may need to cut a small hole to allow the speaker to be heard.
That was where mine was, but you dont need to cut the plastic, just loosen the screws off slide it in and tighten up screws. if you cant hear it you may need to cut a small hole to allow the speaker to be heard.
jai_landrover
Well-Known Member
It looks really neat IMO all the wires can be neatly tucked out of harms way and out of theiving Bastids view when the visor is up. Jai
heggars
Nec flectitur nec mutant
Beauty, I was going to have a looksey on the tinterweb later for it. Ya beat me to it.
Ta Very much
metallicachick86
New Member
thought that were it, theres loadsa signs that tell u around manchester with the tram height on but i forgot.....
ozm29c
New Member
Fellows,
Attached are pictures of how I mounted my UHF Radio. It is a GME Electrophone that has the detachable control face. The pictures better describe where I mounted the control face and microphone. What is not shown is the remaining radio chassis, which I mounted inside the fuse panel door. The aerial is mounted on the left hand side of the Roo Bar. Hope this may help.
Regards
John Wilson
Attached are pictures of how I mounted my UHF Radio. It is a GME Electrophone that has the detachable control face. The pictures better describe where I mounted the control face and microphone. What is not shown is the remaining radio chassis, which I mounted inside the fuse panel door. The aerial is mounted on the left hand side of the Roo Bar. Hope this may help.
Regards
John Wilson
Attachments
Leonberger
Active Member
I used strong self adhesive velcro to install my radio ,, works a treat and stayed rock solid green laning all day .... Just follow the pics , its that simple , and with a 7inch mag mount and a large springer ariel , It didnt even need swr ing lol i run the cable neatly to the front . and use ciggie plugs with adaptor to power everthing
It had a perfect SWR rating out of the bag after tested .. I used and Alan Midland 78 Plus ...
Also it all unplugs when not needed and the disco goes back to normal... lol so not seen and wont be stolen .
Attached Thumbnails
LB
It had a perfect SWR rating out of the bag after tested .. I used and Alan Midland 78 Plus ...
Also it all unplugs when not needed and the disco goes back to normal... lol so not seen and wont be stolen .
Attached Thumbnails
LB
Attachments
This thread carrying on has set me thinking (painful!!). As I said earlier I use an aerial bracket on my roof bars but I noticed my Disco has a seal grommet in a hole in the roof near the back (probably for a GPS aerial). Anyone tried using this to mount a CB twig?
Strikes me if the hole is already there, with a DV27 type mount and a neat run of the co-ax under the headlining would make a really neat install without actually drilling any holes.
Strikes me if the hole is already there, with a DV27 type mount and a neat run of the co-ax under the headlining would make a really neat install without actually drilling any holes.
ericthered
New Member
I had a cb in my car in the early 80s it was a midland, (AM frequency) I thought it had died off since the fm rigs came in apart from the lorry drivers , is it still a popular thing?
Pikey
Dummy Ejection Facilitator..
Not really though it seems to be increasing. Main problem now is that it seems to be full of tossers swearing or playing ****e music all the time. But it's very useful when out laning,
Optimus Prime
Well-Known Member
i've found this too. thought about having mine permanently installed, but just had it on the dash for a while to see how much use it was. hardly anyone about on cb now, so didn't bother with install. velcro on the dash looks like the way to go, with a mag mount.
it's a shame, 'cos I do a lot of mileage, and it would be handy to be able to use for traffic information if nothing else. only ever worked out once, when I was stuck on the M4. I was going london bound and the other guy was going wales bound. He had passed what was holding me up, and I had passed what was holding him up. quick chat, and I was off at the next junction and away, cos it went on for miles.
Optimus, you could go for a ham radio licence. There's more activity on the ham bands and you can use the repeater network to extend your range when on the move....
that and half the people on here seem to have licences lately. There'll have to be a ham radio section on here at this rate!
G6MXT.
that and half the people on here seem to have licences lately. There'll have to be a ham radio section on here at this rate!
G6MXT.
Pikey
Dummy Ejection Facilitator..
Optimus, you could go for a ham radio licence. There's more activity on the ham bands and you can use the repeater network to extend your range when on the move....
that and half the people on here seem to have licences lately. There'll have to be a ham radio section on here at this rate!
G6MXT.
Yep I reckon we should have one.. I'll be taking me intermediate in March
TheVengefulElephant
Well-Known Member
still haven't took my cert, I've got all the bloomin paperwork here anorl, I might book myself in next payday.
