Rubins4
Well-Known Member
Previously fitted to my Series 3 but never used, the reality is I probably never will so it would be better off with someone else.
GLR101 Fairey capstan short bollard winch, together with the brackets etc to operate it; also comes with the stubby cranking handle so it can be operated manually and the owners/parts manual. In addition, I have a cab-mounted hand throttle (currently fitted to my landy) and a chunky natural robe with a hook on one end specifically for this style of winch which will go with it. I believe this winch works with the standard starter dog as fitted to my landy, but specific starter dogs are available elsewhere.
It is all in un-restored but fully working order.
There aren't many of these available at any one time so putting a price on it is difficult. I've found fully restored examples without the hand throttle, handle or rope for £1,500. This lot must be worth £600 but I am open to offers.
Location, Haywards Heath, Sussex. Collection preferable due to weight but I'm open to P&P or local delivery but negotiation.
Pictures of the throttle, handle and rope to follow. EDIT: NOW ADDED. Happy to answer any questions.
GLR101 Fairey capstan short bollard winch, together with the brackets etc to operate it; also comes with the stubby cranking handle so it can be operated manually and the owners/parts manual. In addition, I have a cab-mounted hand throttle (currently fitted to my landy) and a chunky natural robe with a hook on one end specifically for this style of winch which will go with it. I believe this winch works with the standard starter dog as fitted to my landy, but specific starter dogs are available elsewhere.
It is all in un-restored but fully working order.
There aren't many of these available at any one time so putting a price on it is difficult. I've found fully restored examples without the hand throttle, handle or rope for £1,500. This lot must be worth £600 but I am open to offers.
Location, Haywards Heath, Sussex. Collection preferable due to weight but I'm open to P&P or local delivery but negotiation.
Pictures of the throttle, handle and rope to follow. EDIT: NOW ADDED. Happy to answer any questions.
Last edited:
I have added a photo of the relevant bracket page of the manual for you to give you the jist. Its basically 2 riv-nuts to mount the rod bracket on the under side of the cross member (or weld on, as mine was) and 5 in the front to mount the winch plate.
