M

mcgary76

New Member
Hello landy lovers ,

I am new on here and looking for some advice.
I am planning a landrover pickup . It's more of a usable project but most of the decent priced landrovers and in good condition seem to be the hardtop vans.
Is it possible to make a hardtop van a pickup? What's involved and what's the best web site to price parts?
Thank you

Gary
 
Off the top of my head you need a new back door, short roof and the back panel with corner bits
 
Hi,

Thank you for replies lads. From nope it never been done to yes it can be done .
So should be a simply enough job TD5power?

Cheers Gary
 
mcgary76 said:
Hi,

Thank you for replies lads. From nope it never been done to yes it can be done .
So should be a simply enough job TD5power?

Cheers Gary
Click to expand...
its a straight forward job ,it would be worthwhile getting new seals for roof to windscreen ,body to truck cab ,leave all bolts loose till you get door gaps right ,rear door can be cut down to make side opening tail gate or you can get drop down one but you may need hinges welding on and antiluce pins for the top
 
jamesmartin said:
its a straight forward job ,it would be worthwhile getting new seals for roof to windscreen ,body to truck cab ,leave all bolts loose till you get door gaps right ,rear door can be cut down to make side opening tail gate or you can get drop down one but you may need hinges welding on and antiluce pins for the top
Click to expand...

What no chains ?
 
You must log in or register to reply here.

Similar threads

Landy110TD5
110 Pickup to Hardtop conversion
Replies
4
Views
1K
Knappster
Knappster
willFD94
Difference in Mass between a LWB Pickup and LWB Van?
Replies
1
Views
1K
dieseldog69
dieseldog69
19_Hue_95
Starter Motor (Ignition wire?) Problem.
2
Replies
26
Views
2K
19_Hue_95
19_Hue_95
M
Lt77 conversion to a 200tdi s3 88
Replies
3
Views
2K
Turboman
Turboman
T
Getting a Landy for move to Poland
Replies
12
Views
5K
Felixkoch2312
F