griffo

griffo

Member
I have a 1999 td5 that wont start after welding no indicators no electric windows no rear wiper m and s on dash and crossed B I disconnected the battery b4 welding the doors open and lock with key fob I dont have the eka code but if I use the key in the door lock it only opens and locks the drivers door... any help please I am thinking of sending my bcu off for a repair whats the going rate many thanks
 
If the bcu is locked out the car won't start as the car is immobilised.

Did you mean the fob doesn't unlock the car? As if the fob unlocks, it should diasarm the immobiliser too
 
That's weird. Does the immobiliser LED flash even after it's unlocked?

The crossed B indicates a communication problem with the bcu. It's worth having a look at the IDM (fuse box) as its common for corrosion on the tracks to cause problems. It's cheaper and easier than the bcu so thats where I'd start to look.

Do you have access to Hawkeye or nanocom?
 
No I dont I have had a snap on fault code reader all clear I stripped the fuse box all clean and tidy :((
 
You must log in or register to reply here.

Similar threads

C
D2 2004 td5 no start immobiliser
Replies
1
Views
729
Chips666
C
Andrewoldold
M&S lights no crank / potentially immobilised?
Replies
1
Views
164
sierrafery
sierrafery
MAF Diver
Disco 2 Nanocom/RAVE manual is wrong: adjusting windows after removing key and opening a door?
Replies
4
Views
378
MAF Diver
MAF Diver
G
Td5 central locking (another one)
Replies
3
Views
756
sierrafery
sierrafery
D
Disco 2 Can anyone recommend a reliable place to send my BCU to get the immobiliser removed?
Replies
4
Views
897
Daco
D