Leepea

Member

• Jan 22, 2018

• #1

Hi, I have looked around but most of the info regarding repairs or tutorials when repairing bulkheads is around the exterior corners, pillars and footwells. My bulkhead has its issues but I think it's repairable the only thing I can't seem to find is advice on the interior corners, the one side of mine is pretty bad and the other is just starting to go but the outer is remarkably good. Any help would be much appreciated!

https://i.lensdump.com/i/frUWm.jpg
https://i.lensdump.com/i/frP3Z.jpg

https://i.lensdump.com/i/frNgK.jpg
https://i.lensdump.com/i/frfDP.jpg

 

Discokids

Well-Known Member

• Jan 22, 2018

• #2

As it's all square it's fairly easy to fab up yourself, not aware of anybody that sell them.

 

Leepea

Member

• Jan 22, 2018

• #3

I guessed as much, I've looked at all the usual sites and there's no ready made panels. What does it attach to on the inside, are there any supports between the front and back skins other than the windscreen support? I suppose I'll just cut it out and have a look, hopefully somebody who's done it might have a few tips.

 

Discokids

Well-Known Member

• Jan 22, 2018

• #4

Lost all the photos of when I did mine, just the crush tubes but iirc these only attach to one side and aren't actually considered a brace as such.

 

Leepea

Member

• Jan 22, 2018

• #5

That's good to know, I'll get my grinder out... The speed I'm going it'll be this time next year but I'll post some pictures as I go