Can i suggest you buy a head gasket set and fit it yourself, I did i am not a mechanic and was able to do it not as difficult as it looks,if you do it you need to skim your heads, 2 heads skimmed cost me 60 quid,gasket set about 50 quid,
 
I'm a girl and i drive a disco, just got a load of bits to bolt on at Peterborough Show for my birthday
 
If you are close to Chesterfield then there is a good independent called cavendish workshops 01246 229100. They did my wheel bearings for a fair price and seem like a good bunch.
 
j the range said:
i used irontite on mine lasted 7 months still had to put a engine in it, and a rad and water pump but it keeped me on the road for tht time ..
Click to expand...

ive known irortite fail aswell but not holts wonderweld,my mate put it in a 4.6 hse with a slipped liner and still going strong that was 12 months ago
 
Hi i ve used irontite about 18 months ago it worked up until 19 th of july 2011 then yep you gest it the liner/s slipped , 4 days before hols, well iwanted to keep the beast so i ve had the whole engine done , new top hat block etc etc but try irontite but if you keep the car expect the engine to go some time .
 
mucky truka

give maltings 4x4 a ring on 01427 753394 (they are in westwoodside, between Doncaster & Epworth) and speak to one of the chaps there (Andy's the guv and there's nothing he doesn't know about LR). They are indy LR and can do anything on everything from a 1948 series I right up to the new Range rover - prices aren't bad either.

They will be able to deffo tell you if it's the head or the gasket and you can go from there
 
I had the heads done on my old 4.0 LPG engine last year, but it still kept pressurising afterwards. I used Irontite and it cured the problem for a few months but ended up using 16 litres of water to cover the 30 mile trip to work and the same on the way home. I swear she was steam driven for a month or two.
It might work if you catch it early enough for small things and for the money it is definately worth a go. Sadly mine turned out the block/liner had cracked on mine so found a replacement engine and so far so good. Good Luck
:D:D
 
You must log in or register to reply here.

Similar threads

Intestinalworm
Disco 2 Head Gasket and Heater Core
Replies
11
Views
2K
Intestinalworm
Intestinalworm
M
New FreeLander owner needs help please
2 3
Replies
49
Views
4K
Matt_rayner8
M
Koen
P38A 2001 4.6 V8 engine rattle
Replies
15
Views
2K
waddy1200
W
A
P38A 4.6 V8 MY2000 overheating. Intermittent
2 3
Replies
41
Views
5K
andymalham
A
Druim
MOT Fail Emmisions bugger
Replies
13
Views
1K
eightinavee
E