nobber · May 26, 2014

It was a lovely runner, conrod got bent when wading and engine sucked in some water so everything except a conrod available.

kenny16m · May 27, 2014

I'm after the engine brackets/mounts ( the metal bit that bolts to the block)

flat · May 27, 2014

Does it have power steering?

nobber · May 27, 2014

kenny16m said:
I'm after the engine brackets/mounts ( the metal bit that bolts to the block)

Are these the bits you need fella?

nrc5434 - Land Rover parts

Land Rover parts - Used and new parts for all Land Rover and Range Rover

I can take them off and get some photos for you, £45 for the pair plus postage, should be much less than a tenner to post.

nobber · May 27, 2014

flat said:
Does it have power steering?

It does , what bits are you after?

The bracket and pulley are/might be sold , just waiting to hear back, if it falls through and you need them I'll let you know.

http://forum.landrovernet.com/showthread.php/262065-Breaking-a-19j-TD-engine

nobber · May 27, 2014

nobber said:
It does , what bits are you after?

The bracket and pulley are/might be sold , just waiting to hear back, if it falls through and you need them I'll let you know.

Land Rover UK Forums

Sorry , wrong thread.

2.5 N/A crank pulley

flat · May 27, 2014

PHP:

nobber said:
It does , what bits are you after?

The bracket and pulley are/might be sold , just waiting to hear back, if it falls through and you need them I'll let you know.

Land Rover UK Forums

Bracket and pulley, not for me but a guy I know is looking for them. Have let him know about this

nobber · May 27, 2014

flat said:
Bracket and pulley, not for me but a guy I know is looking for them. Have let him know about this

If its for a N/A or 2.5/2.3 petrol I know they fit, for a series I'm not sure but I have read of 2.25's with power steering conversions, I can check if needs be.

If the other guys dsoesnt want them I'll drop you a line, he's on holliday at the moment so might be the end of this week or next week.

flat · May 27, 2014

nobber said:
If its for a N/A or 2.5/2.3 petrol I know they fit, for a series I'm not sure but I have read of 2.25's with power steering conversions, I can check if needs be.

If the other guys dsoesnt want them I'll drop you a line, he's on holliday at the moment so might be the end of this week or next week.

It's for a 2.5na early defender x-army jobbie

Cheers mate

Ed

nobber · May 27, 2014

Should be OK then , this is what I found out for the other fella.

I'm checking part numbers , the bracket according to my parts catalogue (RTC9868CC) has a part number ERC6974 ''Bracket - Mounting Pump and Alt'' and is the same for the N/A and the TD engines.

The pulley ERC6861 , Pulley T.V Damper to CrankShaft - Power Steering Only (there are three , power steering , air con and standard) is also the same for both engines.

You should already have ERC9765 and that is also the same on both engines so the bits should fit.

It states two different pumps and the plate that mounts the pump to the bracket but I dont know if a TD plate and pump will work on a N/A, I dont see any reason why not if the mounting brackets are the same.

How does 45 for the bracket, plate and nuts and bolts and 5 for the pulley sound?

If the price is OK you have second dibs but to be fair the brackets are like hens teeth and stupidly expensive new so it's not likely he will back out , but you never know.

flat · May 27, 2014

Okay cool cheers

will wait to hear what you say when you have heard, don't worry about it though

Ed

nobber · May 30, 2014

Here we go , engine feet, they dont look too bad for something thats been bolted to a landrover for the best part of 30 years.

M8CPK · Jun 1, 2014

Do you have a radiator?? If do where in the country are you??
Ta.

nobber · Jun 1, 2014

Sorry , no radiator, just the engine, turbo , both manifolds, alternator , starter , basically the engine and everything bolted to it.

Dobbs · Jun 2, 2014

two's up on the power steering bits too.. pm sent.

flat · Jun 2, 2014

Dobbs said:
two's up on the power steering bits too.. pm sent.

Your the dude I was referring to in my above posts

nobber · Jun 2, 2014

flat said:
Your the dude I was referring to in my above posts

Cool, if the sale falls through I'll give you a buzz.

flat · Jun 2, 2014

nobber said:
Cool, if the sale falls through I'll give you a buzz.

Let dobbs know if I falls through as it was him I was keeping an eye out for the bracket for

M8CPK · Jun 4, 2014

Is the cylinder head still available? If so is it in good condition? How much??
Thanks.

nobber · Jun 4, 2014

M8CPK said:
Is the cylinder head still available? If so is it in good condition? How much??
Thanks.

I'll have a look in the morning, I think it has some cracking around the pre combustion chambers but the work shop book says some cracking is acceptable so it never really bothered me.

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Similar threads