D

Discomanic

New Member

• Nov 4, 2012

• #1

I have just changed all my discs and pads,bled all the brakes, but with the engine running the brake upon pressing slowly goes to the floor is this normal.or is there an underlying problem,there is no brake fluid leaking,so I am out of ideas can anyone help please?

 

Ianski

New Member

• Nov 4, 2012

• #2

a lot of time the brakes get a better peddle when bedded in,
especially if there is a lip on the disc.
is the pedal right to the floor or just low and hard

 

D

Discomanic

New Member

• Nov 4, 2012

• #3

If I pump the brake pedal and keep my foot with pressure on the brake it goes to the floor slowly

 

Grit Valve

2000 4.6 Vouge

• Nov 4, 2012

• #4

Sound like you need to bleed them again ... If the pedel keeps going to the floor you must have a leak.

 

Ianski

New Member

• Nov 4, 2012

• #5

Check for leaks and give it another bleed
It has been known for flexi brake pipes to blow up like a balloon under pressure so you loose you peddle

 

D

Discomanic

New Member

• Nov 4, 2012

• #6

Thanks,I would be right in saying when bleeding the brakes the engines running, front left then right,rear left(passenger) then right

 

Ianski

New Member

• Nov 4, 2012

• #7

the order only really matters on an empty system.
i do it with engine off, with no servo help the peddle should be rock hard, and drop slightly when you start

 

D

Discomanic

New Member

• Nov 4, 2012

• #8

Nice one I will do that and let you know how it goes.cheers