lcbandit · Oct 29, 2014

Is this my brake pedal switch if it is how the hell am i supposed to get that nut off? There's hardly any showing assuming that's how a get it off that is

Ta

Mandy

jamesmartin · Oct 29, 2014

switch is plastic so lock nut wont be that tight, you may just be able to unscrew switch

nrgserv · Oct 30, 2014

pull the two connectors apart and use a short bit of (insulated) wire to join them together. (wires going to the switch, not the switch its self)
make sure the brake lights come on when joined. (don't forget to have the ignition on)

no point removing the switch, if it isn't faulty!
if the brake lights don't come on when the switch is bypassed, your fault lies elsewhere.

lcbandit · Oct 30, 2014

So I'm pulling that black cap off n shoving some wire in there?

nrgserv · Oct 30, 2014

lcbandit said:
So I'm pulling that black cap off n shoving some wire in there?

nope, the two white plastic things with the green wires in them.
connect the white plastic thing with two green wires to the white plastic thing with one green wire.

Kwakerman · Oct 30, 2014

nrgserv said:
nope, the two white plastic things with the green wires in them.
connect the white plastic thing with two green wires to the white plastic thing with one green wire.

Ever worked for Haynes Manuals?

trax · Oct 30, 2014

Refitting is the reverse of removal

nrgserv · Oct 31, 2014

sniggers

edit-
and anything referring to a torch, is a hand operated lantern and not oxy acetylene cutting equipment.
and don't forget to securely chock the road wheels.

lcbandit · Oct 31, 2014

nrgserv said:
nope, the two white plastic things with the green wires in them.
connect the white plastic thing with two green wires to the white plastic thing with one green wire.

Ah ok i understand cheers will give it a go today if i can enlist someone to stand behind the landy

nrgserv · Oct 31, 2014

lcbandit said:
Ah ok i understand cheers will give it a go today if i can enlist someone to stand behind the landy

if ya joining the wires together with a short lump of cable, then don't be so lazy and walk round the back yersen to see if the lights are on

trax · Oct 31, 2014

or lick em

nrgserv · Oct 31, 2014

trax said:
or lick em

don't

cos she will

ound:

Iann · Oct 31, 2014

You could break the glass on your brake light bulb and attach a 12v audible device to the ellectrodes
Then you will not need an accomplice or a tiresome trip to the rear of your landy

nrgserv · Oct 31, 2014

Iann said:
You could break the glass on your brake light bulb and attach a 12v audible device to the ellectrodes
Then you will not need an accomplice or a tiresome trip to the rear of your landy

but that would require the tiresome trip in the first place

Southernlandy · Oct 31, 2014

Park next to something that reflects light, eg.Window or another car, look in the mirrors for a reflection

trax · Oct 31, 2014

or do it at night

Kwakerman · Oct 31, 2014

Install a bulb monitoring system

lcbandit · Nov 1, 2014

nrgserv said:
don't

cos she will ound:

Haha I'm not that stupid n forgot cos it's making a circuit that i don't need an accomplice

Haven't had chance to do it yet been busy n now I'm on days

nrgserv · Nov 1, 2014

lcbandit said:
Haha I'm not that stupid n forgot cos it's making a circuit that i don't need an accomplice

Haven't had chance to do it yet been busy n now I'm on days

do it at night?

lcbandit · Nov 1, 2014

nrgserv said:
do it at night?

busy tonight being a pyrotechnic

I'm on nights monday I'll sort it then

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

.

Well-Known Member

Well-Known Member

Well-Known Member

.

Well-Known Member

Active Member

Well-Known Member

Active Member

.

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads