Rorie said:

Just bought a replacement brake master cylinder (NRC9529).

1) There is a rubber seal between this and the servo, but I cant see it on the parts catalogue. What is the part number? The part above never came with the seal.

2) would my new master cylinder be 'plug in and play' or will I need to do anything to it first - prior to bleeding brakes etc.

Thanks

Click to expand...

Rorie said:

Just bought a replacement brake master cylinder (NRC9529).

1) There is a rubber seal between this and the servo, but I cant see it on the parts catalogue. What is the part number? The part above never came with the seal.

2) would my new master cylinder be 'plug in and play' or will I need to do anything to it first - prior to bleeding brakes etc.

Thanks

Click to expand...

jamesmartin said:

normally an o ring comes with the master cylinder

Click to expand...

Rorie said:

hmm, that's what I was expecting. But nothing there! I got it from Paddocks, so they are unlikely to help me if I ask the question over the phone.

I assume it should all be greased up and ready to go? No need to strip it down prior to install?

Click to expand...

jamesmartin said:

no oring over the cylinder and up against the flange,yes ready to fit as long as it has an o ring to seal the joint between servov and cylinder

Click to expand...

Rorie said:

Where did you find that number? All I can see is text for that which states 'servo to pedal box seal'. so I'm not sure if that's it or not. Its the break master to servo, rather than servo to pedal box. That said, I cant remember seeing a seal between the servo and the pedal box haha.

Click to expand...