tyke100 · Sep 10, 2020

before i explode after spending today 170 unnecessary pound in this peace of metall for a new radiator it now has the red light for brakes on.
nanocom says brake pressure switch failure.

it is impossible spending this amount on money in any car. i wouldnt even spend at service costs in a new one and rather burn it.

joke aside

anyone has a partnumber for this brake pressure switch?
i not buying it from land rover. i would rather see them going bankrupt. and without this number i cant get anywhere by searching for one.

sorry. really peed of now.

RangeRoller dt · Sep 10, 2020

Rad is in A O K

Brake pressure switch may just need resetting
The helpful fellow from tuther threads is the guy to ask about that

tyke100 · Sep 10, 2020

resetting?

ok that sounds better as the prices of about another 150 quit for that thing.

sorry for being dumm here now - im just tired. all day on that car with other little maintensnce i though i give it to be nice and the thank you is a red light and more dollar signes. - how do i find the threat or contact the person please?

I did have the brake pressure failure on before when I changed the accumulator. Cleared fault and was fine for 2000 miles.
Now it came on again after changing a radiator and give it some.rust protection.
Tried to clear the fault but light comes on again when driving off. Grrhhhh

RangeRoller dt · Sep 10, 2020

tyke100 · Sep 10, 2020

Trying to download a couple.times

Will not work. I tried every link I could.find.

RangeRoller dt · Sep 10, 2020

I can’t get it work either
It used to on my old phone so I am working from ~~poor~~ memory
Can buy it on a cd rom disc on fleabay but I’ve not got a computer and I know enough to manage already.

It has been done before so look for it in the LZ searchbar.
Look for a BrianP38dse one as he is the guy knows it 110%

tyke100 · Sep 10, 2020

Ok. Thank you

RangeRoller dt · Sep 10, 2020

Since you said TY
This is it in a nutshell (don’t ask me about details)

brianp38dse said:
Pull out plunger on switch hold peddle down fit switch then let peddle up and it will set the switch to the correct height job done.

marjon · Sep 10, 2020

tyke100 said:
Trying to download a couple.times

Will not work. I tried every link I could.find.

Not sure why you have trouble downloading it. I have just downloaded it to my new I pad and yesterday to my windows computer yesterday?

https://doc-0c-5g-docs.googleuserco...879592Z&hash=29qefvvl00abs96cas47ngedrkch8etc

try this one, just worked for me.

J

RangeRoller dt · Sep 10, 2020

On my iPhone 6 I get blank screen when click ^^^

marjon · Sep 10, 2020

RangeRoller dt said:
Since you said TY
This is it in a nutshell (don’t ask me about details)

But (somebody will correct me if wrong) there is 2 switches in the brake pedal? 1 open/close, 1 close/open. A nanocom should show both positions swap.

But that aside what did you disturb during the work?

J

tyke100 · Sep 10, 2020

marjon said:
Not sure why you have trouble downloading it. I have just downloaded it to my new I pad and yesterday to my windows computer yesterday?

https://doc-0c-5g-docs.googleuserco...879592Z&hash=29qefvvl00abs96cas47ngedrkch8etc

try this one, just worked for me.

J

i just got that.
Access to doc-0c-5g-docs.googleusercontent.com was denied

tyke100 · Sep 10, 2020

marjon said:
But (somebody will correct me if wrong) there is 2 switches in the brake pedal? 1 open/close, 1 close/open. A nanocom should show both positions swap.

But that aside what did you disturb during the work?

J

nothing along the brake system. not even touched a y sensors.my nanocom only says brake pressure switch failure.
not which one or what to do with it.
only clear fault.

i wonder if the system need bleeding ?

brianp38dse · Sep 10, 2020

If its the brake peddle switch that is at fault there is a panel above the peddles remove that three or four pin clips, then you push peddle down and hold pull out plunger from switch then let the peddle come up and it will self set, they e a two way switch.
or fit a new one https://www.ebay.co.uk/itm/xbk10017...647832?hash=item43aa666bd8:g:3OAAAOxyPLpRcOQi

RangeRoller dt · Sep 10, 2020

Super Brian

marjon · Sep 10, 2020

Maybe young mister @RangeRoller dt can explain as I am off to bed

J

RangeRoller dt · Sep 10, 2020

Crafty so and so ....

RangeRoller dt · Sep 10, 2020

I have RAVE !!!!

Whipeee

aj1954 · Sep 10, 2020

Brake pressure switch is on the Abs pump, iirc.

tyke100 · Sep 10, 2020

yeah and i hope its not the one i need to replace. the other half is standing next to me with a can of petrol after i pended nearly 500 quit on that car to go away on monday on holiday.
and i know she will burn it. as i sold cars from her for less costs of keeping it alive.

Active Member

Well-Sprung Member

Active Member

Well-Sprung Member

Active Member

Well-Sprung Member

Active Member

Well-Sprung Member

Well-Known Member

Well-Sprung Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Well-Sprung Member

Well-Known Member

Well-Sprung Member

Well-Sprung Member

Well-Known Member

Active Member

Similar threads