catman275

Active Member

Full Member

• Oct 15, 2018

• #1

Hi folks,
Is there anything special about the material used in the pedal box gaskets?
I have some thin cork sheet. Would this be suitable to use?
thanks Peter.
(Just trying to save a few coppers)

 

minecab

Active Member

• Oct 15, 2018

• #2

you could use a bead of silicon

 

dag019

Well-Known Member

• Oct 16, 2018

• #3

I used neoprene tape I had left over from refurbing the seat box on one of mine. think you could probably get away with anything, it is after all not a critical sealing part.

 

C

Colthebrummie

Well-Known Member

• Oct 16, 2018

• #4

Make one out of a cornflakes box with a bit of Hylomar.

Col

 

Flossie

Well-Known Member

• Oct 16, 2018

• #5

I used cork there. Water can get in the cab through that area so use something suitable.

 

R

rob1miles

Well-Known Member

• Oct 18, 2018

• #6

I think I used gutter mastic.

 

catman275

Active Member

Full Member

• Oct 18, 2018

• #7

Plenty of options there
Thanks for the ideas guys.