Bought this last week as a non runner (bought off a garage who couldn't get it running)
paint work is rough front osf door/wing is damaged,front doors
drop when opened, has had a sunroof but has been filled in & has runs you could hang your jacket on.
Although on the plus side everything mechanical is new with a mountain of recipes for everything
chassis is mint which doesn't have any signs of welding or patches.
Has got d2 lights fitted on the rear (why??) & a new front panel only 1 little bit of rot I could find is on the lower a pillar next to the sill prob 1" x 1" so I will weld it one night this week.
Spent a bit of time on Saturday fitting the new gearbox oil cooler pipes, top one was a pain as the threads were damaged on the box fitting so removed/cleaned up sorted, next problem (no dip stick tube or dip stick) for the auto box !!!! Where can I get one or does anyone have one??
I went over the engine bay checking & fitting nuts bolts screws jubilee clips(lots of them)
& done the usual rewiring & run it of a 12v pump & 2 x 5ltr one for feed & one return
then she burst into life.
Happy chappie I was lol
Parts required/missing are brake pipes, fuel pipes(ordered), power steering hoses,
autobox dip stick & tube,
Here are a few pictures I will update as I go
paint work is rough front osf door/wing is damaged,front doors
drop when opened, has had a sunroof but has been filled in & has runs you could hang your jacket on.
Although on the plus side everything mechanical is new with a mountain of recipes for everything
chassis is mint which doesn't have any signs of welding or patches.
Has got d2 lights fitted on the rear (why??) & a new front panel only 1 little bit of rot I could find is on the lower a pillar next to the sill prob 1" x 1" so I will weld it one night this week.
Spent a bit of time on Saturday fitting the new gearbox oil cooler pipes, top one was a pain as the threads were damaged on the box fitting so removed/cleaned up sorted, next problem (no dip stick tube or dip stick) for the auto box !!!! Where can I get one or does anyone have one??
I went over the engine bay checking & fitting nuts bolts screws jubilee clips(lots of them)
& done the usual rewiring & run it of a 12v pump & 2 x 5ltr one for feed & one return
then she burst into life.
Happy chappie I was lol
Parts required/missing are brake pipes, fuel pipes(ordered), power steering hoses,
autobox dip stick & tube,
Here are a few pictures I will update as I go