DaveyGTi · Feb 14, 2021

This should be a test to see who knows their fuel pump trivia!
On the Bosch VE pump the LDA boost adjuster aka the 'star wheel' is threaded on, the replacement does not come pre threaded, I assume it should self thread as it's screwed on, however obviously it will require some force to do so. Seeing as it's quite soft metal and having taken quite a chunk out of my existing one trying to free it up I'm not keen to graunch it round with the grips. Is there a special tool for it? Like a star wheel shaped socket? Or failing that does anyone know the thread size and pitch so I can tap it myself?

lynall · Feb 14, 2021

Diesel pump shop anywhere near you?

neilly · Feb 14, 2021

You are probably the only person in the history of the universe ( excluding diesel specialists ) who has ever needed to replace with a new starwheel.

As Lynall says, I would be looking to get to a specialist near you and ask them to fit it.

Cheers

DaveyGTi · Feb 14, 2021

lynall said:
Diesel pump shop anywhere near you?

Not as far as I know, what were you going to suggest?

DaveyGTi · Feb 14, 2021

neilly said:
You are probably the only person in the history of the universe ( excluding diesel specialists ) who has ever needed to replace with a new starwheel.

As Lynall says, I would be looking to get to a specialist near you and ask them to fit it.

Cheers

Yeah I thought I might be, there are a few threads in various forums with people asking how to free up a stuck one but not much after that, I can confirm however, the answer to 'how do I free up my siezed star wheel?' is not 'give it a few light taps with a hammer and drift!'

neilly · Feb 14, 2021

DaveyGTi said:
Yeah I thought I might be, there are a few threads in various forums with people asking how to free up a stuck one but not much after that, I can confirm however, the answer to 'how do I free up my siezed star wheel?' is not 'give it a few light taps with a hammer and drift!'

Why not give a diesel specialist a shout, and ask them if they will sell you a star wheel. I am sure they have a box of junked pumps and most of them will have good starwheels in them , it is not as if they wear out.

Cheers

adrian hogg · Feb 14, 2021

are you asking about the "alloy" wheel which adjusts the pre-load on the boost spring?

DaveyGTi · Feb 14, 2021

neilly said:
Why not give a diesel specialist a shout, and ask them if they will sell you a star wheel. I am sure they have a box of junked pumps and most of them will have good starwheels in them , it is not as if they wear out.

Cheers

There is a lorry fitters about half an hour away I've done a bit of electrical work for, I might give them a ring and see if they've got anything.

DaveyGTi · Feb 14, 2021

adrian hogg said:
are you asking about the "alloy" wheel which adjusts the pre-load on the boost spring?

Yeah that's the one

adrian hogg · Feb 14, 2021

i cannot imagine why the new one has no thread as it is designed to be adjusted when pump is rebuilt and is retained by a horseshoe shaped spring clip, it should just click as you turn it.

what part of the country are you in

neilly · Feb 14, 2021

DaveyGTi said:
There is a lorry fitters about half an hour away I've done a bit of electrical work for, I might give them a ring and see if they've got anything.

You could always ask on the site to see if any of the nice folk on here have a knackered FIP sat in a box somewhere?

Maybe one of them could remove the starwheel and send to for a few beer tokens, you never know your luck.

Cheers

lynall · Feb 15, 2021

DaveyGTi said:
Not as far as I know, what were you going to suggest?

Only the same as the others have said, see if they have an old one you can buy.
I did look at my spare pump and the thread is quite fine and a large diameter, so I dont think it would self cut, and diy threading it and getting the thread dead square would be bit of a challenge.
Did not reply last night as had to shoot out.

Recent thread where lz member is going to send a few pumps to dieselbob for repair in exchange for one good one, might be worth a search and chat him up?
Or just ring dieselbob?

DaveyGTi · Feb 15, 2021

Thanks all, I'll try the fitters first and if not I'll have a look for the dieselbob thread.

lynall said:
I did look at my spare pump and the thread is quite fine and a large diameter

Yeah seemed like maybe m17/M18ish but with a <1mm pitch, quite an odd size no doubt!

Cavey_P38 · Feb 15, 2021

dieselbob.co.uk

Several members on here have used it and he comes highly recommended,

an email with your issue and see what he suggests etc.

DaveyGTi · Feb 22, 2021

Well I didn't have much luck (and I also realised it's not my first 'what thread is X part' post on here and prob won't be the last) so I bought a thread gauge and a Vernier caliper. The Answer is M17x1.0, so it's here if anyone else ever needs to know! I've ordered the corresponding tap so I'll let you know how it goes.

Cavey_P38 · Feb 22, 2021

Shared knowledge is always good.. except when u have farted...lol

thanks for reporting back

DaveyGTi

Well-Known Member

lynall

Well-Known Member

neilly

Well-Known Member

DaveyGTi

Well-Known Member

DaveyGTi

Well-Known Member

neilly

Well-Known Member

adrian hogg

Well-Known Member

DaveyGTi

Well-Known Member

DaveyGTi

Well-Known Member

adrian hogg

Well-Known Member

neilly

Well-Known Member

lynall

Well-Known Member

DaveyGTi

Well-Known Member

Cavey_P38

Well-Known Member

DaveyGTi

Well-Known Member

Cavey_P38

Well-Known Member

Similar threads