congo181

Well-Known Member

• Jul 24, 2022

• #1

Hi all. I have a bonnet mounted spare but the fixing doesn’t seem correct to me.
If I mount it hub up, the bolts will stretch the bonnet up and I cannot get the split pin in.
If I mount it hub down, the bolts cannot do up to capture the wheel.
The second way looks more correct but like there’s something missing.
Any photos of an original install would be appreciated. Cheers.

 

dag019

Well-Known Member

• Jul 24, 2022

• #2

I know the series mounts were designed for hub down when fitting a wheel. But unortuantly cannot help with the defender. Do you have some pictures of your setup may help visualise the issue? Are you using standard wheels?

 

congo181

Well-Known Member

• Jul 24, 2022

• #3

dag019 said:

I know the series mounts were designed for hub down when fitting a wheel. But unortuantly cannot help with the defender. Do you have some pictures of your setup may help visualise the issue? Are you using standard wheels?

Click to expand...

Hi. Yes standard steel rims and tyres.
This is the best pic I have to hand.

 

blue beasty

Leaks an prone to bits dropping off

• Jul 24, 2022

• #4

Hub down and spacers on the bolts

 

congo181

Well-Known Member

• Jul 24, 2022

• #5

blue beasty said:

Hub down and spacers on the bolts

Click to expand...

That’s what I was thinking, or maybe stiff springs, but none of the diagrams I’ve ever seen show them.

 

zeaphod

Well-Known Member

• Jul 27, 2022

• #6

Hub down, the wheel rests on rubber blocks bolted to the bonnet, washers on either side of the mounting plate. If you have a look at the kit parts on the PA Blanchard website it will help. They were also the cheapest place to buy one a couple of years ago.