Chrisw8
Well-Known Member
Crossmember from Yrm arrived. looks tidy.
Anyone know why the side that faces the boot floor when fitted is not welded to the crossmember ?
Is it to wedge the floor support strip in, then weld it up??
anyways, cleaned off some more of the chassis and inner rear quarters and gave a good dose of Fertan !!
off to look for some acrow props to give the rear some support before I remove rest of crossmember.
Anyone know why the side that faces the boot floor when fitted is not welded to the crossmember ?
Is it to wedge the floor support strip in, then weld it up??
anyways, cleaned off some more of the chassis and inner rear quarters and gave a good dose of Fertan !!
off to look for some acrow props to give the rear some support before I remove rest of crossmember.
it is because it is extra, so it comes as an extra part.
difficult to see from those pics.
have yu looked at the fitting vids?
have yu looked at the fitting vids?
Google is your friend.... and, funnily enough, the YRM web site 
.
.
Chrisw8
Well-Known Member
.... and, funnily enough, the YRM web site
Yrm website .......D'oh .... Will have a looksee on PC when I get in , on phone at mo waiting for shower to stop !!
is that half decent stuff?
Chrisw8
Well-Known Member
I been using it over all the disco. Treat with Fertan, Two coats Bonda, then two coats of Manor Chassis Black.
It seems to be pretty good at keeping the rust away.
I did a bit of googling and searching on rust treatment etc and it got great reviews, though I'm sure there's other stuff just as good...... not cheap though.....about £37 for 2.5l on fleabay.
.
It seems to be pretty good at keeping the rust away.
I did a bit of googling and searching on rust treatment etc and it got great reviews, though I'm sure there's other stuff just as good...... not cheap though.....about £37 for 2.5l on fleabay.
.
Bennehboy
Well-Known Member
This stuff's pretty good too -> http://www.arc-rite.co.uk/high-build-zinc-phosphate-direct-to-metal-primer
You don't want to be painting with it indoors though, Xylene based so will give a monster headache.
I used their tractor enamel after that on my axles/brake bits/trailing arms etc, and they still look mint a year later after a lot of rock salt.
You don't want to be painting with it indoors though, Xylene based so will give a monster headache.
I used their tractor enamel after that on my axles/brake bits/trailing arms etc, and they still look mint a year later after a lot of rock salt.
i have waited 8..... another 3 wont harm
