Air chisel?
You really do need air
200L tank - 100psi @ 15cfm
do you have a hammer gun?
there must be someone local that can give you some welly.....
please change yo location to be a bit more useful
there must be someone local that can give you some welly.....
please change yo location to be a bit more useful
Chrisw8
Well-Known Member
I’m shy ....
Yep got hammer gun..... won’t touch it. .... ears are ringing. !!!
I’ll leave it till Monday and ask bro to belt it with chisel while I hold bolt.
Got things to do at home and still haven’t fixed my Megane .... plug on blower needs changing. !! It’s up in Grannies room of course !!!
behind the clock?
jamesmartin
Well-Known Member
nut will split or stretch enough if you hit it center of flat ,dont try and chisel it undone so you dont need to hold the other endHaven’t got air .
Just tried hammer and chisel, can only get one hit on before socket falls off other end and my back starts hurting bending over
This could be a long jobby
So you can't physically get socket and bar on it?
Chrisw8
Well-Known Member
Yeah , I got 30mm socket on bolt end. And mole grips on nut end...nut is fkd.
I’ll leave it till Monday and get bro to bash it while I hold it.
Thanks James for info & Resto for offer, I will be smashing it Monday.
1 1/8 is the size of the new bolt head. iirc the associated nut fitted sweet in 27mm spanner.
I’ll leave it till Monday and get bro to bash it while I hold it.
Thanks James for info & Resto for offer, I will be smashing it Monday.
1 1/8 is the size of the new bolt head. iirc the associated nut fitted sweet in 27mm spanner.
9" grinder fits inside the ears from beneath, slice through both sides, just make sure you tie it up or it will try and smack you in the face, don't ask me how I know 
But a reciprocating saw will work nicely and probably more safely lol
But a reciprocating saw will work nicely and probably more safely lol
make sure you can turn the bolt if you decide to cut through it.
